The cutting principle of the CNC plasma cutting machine is mainly a method of converting electric energy into plasma flow to assist the punching and cutting of the steel plate to the pressurizing gas. At this stage, the mainstream cutting is mainly for thin plates that cannot be cut by flames and thick plates that cannot be cut by laser. , which can also be used with the flame and cut some 6-25mm metal plate firewood, this is just the thickness of CNC plasma cutting, if it is manual cutting thickness can reach 50-60mm maximum, Naiba CNC current use of plasma power mainly domestic And imported two major categories, importing specialty products from Pegasus, Haibao, and domestically produced products such as Sichuan Huayuan, etc. Relative to better power supply. According to customer requirements, multiple specifications can be matched, which can be used conveniently and effectively. Control costs.
Compared to CNC flame cutting machine cutting, plasma selection must pay attention to the different thickness of the steel plate and cutting slope requirements and cutting ability and precision are quite different, plasma is divided into ordinary, fine, laser cutting effect is more and more Well, the price and configuration are getting higher and higher, so it is worth the user to listen to the opinions of the cutting machine manufacturers. In addition, high-power plasma power has emerged in recent years, users must be examined for good choice, so as not to interfere with cutting. No matter which plasma power source, there is a certain configuration, so do not blindly choose cheap or expensive, in fact, both domestic and imported can meet the cutting situation.
Chinese cutting machine trading network, allowing you to buy the rest assured! A variety of CNC cutting machine and CNC cutting equipment, a variety of cutting machine models, let the optional! Official website: /