- Model NO.: SLA SERIES
- Type: Piston Solenoid Valve
- Power Supply: AC & DC Solenoid Valve
- Sla Series: 1/8′′~2′′
- Specification: ISO & TUV & CE
- HS Code: 8481804090
- Connection Form: Thread
- Valve Structure: Piston
- Application: Industrial Usage, Water Industrial Usage, Household Usage
- Trademark: SANLIXIN
- Origin: Yuyao, Zhejiang, China
Contact Person:
Jessica    TEL: 0086-574-62636060   MOBILE: 0086-13777166585
Vivian        TEL: 0086-574-62640822   MOBILE: 0086-13967833354
Devin        TEL: 0086-574-62559181   MOBILE: 0086-15888035074
SLA Stainless Steel Series. 2/2-way Piston Solenoid Valve. Normally Closed
Body Material: 304 Stainless Steel
Orifice: 15mm~50mm
Pipe Connection: 3/8"~2" Flange Connection: Dn25~50
Fluid Media: Steam\Water\Hot Water\Air\Oil etc.
Piston Solenoid valve
Stainless Steel teflong seals
0.5-10bar for steam
0.5-25bar for water or gas.
High quality
Steam solenoid valves 180dgree
1/8 to 2 inch
And 0.5-10bar for steam
Brass or S. S. 304
And for other fluid media the pressure 0.5-250bar
Yuyao Sanlixin Solenoid Valve Co., Ltd specializes in designing and manufacturing all kinds of fluid solenoid valves.
Our solenoid valve have direct acting type, pilot operated type, piston types
The body can be made of brass, stainless steel, plastic, Teflon and aluminum and the seals can be made of NBR, EPDM, viton, Teflon, PTFE silicon
The valve size can be DN1.00mm to DN150mm; Media can be water, hot water, gas, air, steam. Light oil, weak acid& alkali fluids etc.
So our solenoid valves are suitable for all the general purpose equipment.
A transmission Oil Cooler is often considered essential in high-strain situations because a transmission's lubricating fluid heats up with each gear change. While not crucial for highway driving when vehicles more or less stay within a few gears, transmission coolers can markedly improve the performance and longevity of transmissions that are subjected to a great deal of stress. Overheated transmission oil can lead to slower gear shifts, worn seals, lower mileage, and, ultimately, premature failure.
Even though the main job is to cool and lubricate the engine, this part can also act as an important coolant for a number of other parts. A motor's bottom end, which includes parts such as the crankshaft, bearings, camshaft, rods, and pistons, is also cooled only by engine oil, for instance, and this cooling can impact overall performance just as much as it could in the engine itself.
As an important type of engineer oil cooler, stacked-plate designs, force oil through a series of metal plates. Heat dissipates as air moves across the plates, and the oil cools faster when it has greater surface area and is shallower, too. The oil cooler can improve the engineer`s performance and longevity, and also can help lubricate the gears of a vehicle`s transmission system.
Engine Oil Cooler,Stacked Plate Oil Cooler,Car Oil Cooler,Transmission Oil Cooler
Wuxi Better Technology Co., Ltd , https://www.btheatexchanger.com