[New weather after year, cutting machine through the bottom price. The lowest price of the entire network, all kinds of custom cutting machine will be 50% discount wholesale order price, a small piece of drawings to achieve a three-dimensional 3D cutting machine parts, where to set where, customers no longer have to worry about no supply and reserve price . What are you waiting for? The reserve price is known to you. You haven't asked if the inquiry is low. For details, please contact the official website of China Cutter Trading Co., Ltd., Tel: :/ Reference: Cutting Machine
We know that the daily maintenance of machinery and equipment is of utmost importance. In the course of the use of laser cutting machines, we must meticulously complete the day-to-day maintenance and maintenance of the equipment for safety protection and efficient production. The following describes the laser cutting machine maintenance guidelines.
First, the linear guide is filled with lubricant. The smoke and dust produced by the laser cutting machine after cutting for a period of time have corrosive effect on the guide rails, so regular maintenance of the guide rails is required. Cut the power off the laser cutting machine, clean it with a clean soft cloth guide rail, and then dribble the lubricating oil on the guide rail. When the oil is finished, let the slider roll back and forth on the guide rail to ensure that the lubricating oil enters the inside of the slider.
Second, the mirror, focusing lens wipe. After a laser cutting machine is used for a period of time, smoke will adhere to the surface of the lens, not only affecting the cutting depth, but also affecting the cutting accuracy. About a week or so, you should carefully wipe it with absolute alcohol.
Third, the timing belt (belt) is tightly adjusted. There are several timing belts in the drive system of the laser cutting machine. If the timing belt is too loose, ghosting will occur. If the timing belt is too tight, the timing belt will wear out. After using for a period of time, it is necessary to adjust the tension screw of the timing belt and adjust the timing belt to be tight and suitable.
Although the daily maintenance work of the laser cutting machine is somewhat tedious, only good compliance can extend the service life of the laser equipment and obtain the best results.
[I can't think of it. I can't do it. Change your style from now on. Opening the Chinese cutting machine trading network is equivalent to opening up your wealth road, come and click on the website now! Reference: Cutter Editor: kswkfhl
Product Description
I. Some Features of XY-4-3A Drillng RigNew Condition Core Sample drill
1. Power can be electrical motor or diesel engine, as per your project needs;
2. Engine and Mud Pump,Reduction gears and Drill rig are all installed on one base, more compact structure and improve the overall rigidity;
3. Mounted in 2-wheel trailer,easy to move around when working;
4. Easy to disassemble,installed and operation, the Heaviest part is less than 100KG, convenient for maintenance and transport;
5. Using alloy bit for soft ground,using diamond bits for hard ground.
II. Customers
This hydraulic drilling rig has been successfully sold to Kenya, Peru, Chile, South Africa, Haiti, Congo, Philippines, Malysia, Gabon, Kenya, Columbia, Russia, Uganda, Panama, etc. Some of them are for personal use, some to do engineering, some trading companies. Namibia customers are used to do charity for poor children wells, we give him a big discount without any profit. You are welcomed to visit our company and factory at any time!
Xy-4-3A Drillng Rig,Drilling Machine,Drillng Rig,Engineering Drilling Rig
JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.xitecdrillingwx.com