Working Principle
High shear dispersing emulsifier effectively, quickly and evenly disperse a phase or usually, there phases are dissolvable to each other. The rotor revolves quickly and strong force is produced through high tangent speed and high frequency mechanical effect, therefore, the material in the narrow slotamong stator and rotor receives strong forces from mechanical and liquid shearing, centrifugal force, pressing, liquid fraction, clashing, tearing and rush water. The dissolvable solid, liquid and gas material is then instantly dispersed and emulsified evenly and finely with better production procedures and appropriate addictives and finally products with stable high quality are made.
Installation
Top entry, open vessel
These mixers are used in an open vessel, that is, a vessel with normal pressure. They are top entry mixers, can be installed onto a lifting stand, or directly onto the vessel by a flange or traverse. A coupling between the motor and shaft is optional for low noise and stable running.
Top entry, closed vessel
These PS series top entry High Shear Mixers are with a mechanical seal, which enables them to be working in a pressurized or vacuum vessel. Single seal or double seals are available.
Side entry
The side entry mixers are very useful when the tank is deep but narrow, or when the top space of the vessel is limited for the top entry ones.
Bottom entry
The bottom mixers are outstanding when the liquid level in the tank can get very low during operation, or there is very limited space above or around the tank for either top or side mounted ones. What is more, strong vortex as well as aeration is greatly reduced with the PERMIX bottom mounted mixers.
Technical Parameters
| Model | Capacity(L/H) | Power(kw) | Speed(rpm) |
| HD-90 | 5-50 | 1.5 | 2800 |
| HD-100 | 50-100 | 2.2 | 2800 |
| HD-120 | 100-300 | 4 | 2800 |
| HD-140 | 200-800 | 7.5 | 2800 |
| HD-160 | 300-1000 | 11 | 2800 |
| HD-180 | 500-1500 | 18.5 | 2800 |
| HD-200 | 800-2000 | 22 | 1400 |
| HD-220 | 1000-3000 | 30 | 1400 |
| HD-240 | 1500-5000 | 37 | 1400 |
About HundomGuangzhou Hundom Machinery Equipment Co., Ltd.has been manufacturing colloid mill, jacketed kettle, rotor pump, mixing tank and other machinery equipment for 14 years , putting quality as our first consideration. We own a team with rich experience in the field, if you have any question, contact us for the professional answer.
Guangzhou Hundom Machinery Technology Co.,Ltd.Add:No. 115, No. 7, Haina Industrial Park, Shibi Street, Panyu District, Guangzhou City, Guangdong Province, China
Sales: Shum
Tel:+86-020-89081205
Mobile:+86-138-2213-4643
Welcome to visit our factory !
Aluminum Extrusion Pipe is one of our strong products.We have 550T of extrusion mill and 2650T extrusion line.Also we have our own tooling plant which has more than 10years experience.These advantages enables us to offer our clients extrusion tubes with fast delivery and reliable quality.Aluminum Extrusion Pipe can be used in many applications.We have rich experience in auto industry.There are round Aluminum Extrusion Pipe and micro channel multiport aluminum tubes we can offer.The wall thickness and ID and OD can be from 3mm to 150mm.
Turst in harmony,we care what our clients care
Aluminum Square Pipe, Extruded Aluminum Pipe, Extruded Aluminum Tube,Aluminum Extrusion Pipe
Trumony Aluminum Limited , https://www.szaluminumtube.com