Brief introduction for spiral classifier
According to the principle that different grains are with different specific gravity and sedimentation rate in the liquid, the fine ore flows in the water and the coarse ore sinks in the bottom. The classifier that has machine grading by discharging from the top can filtrate the materials and send coarse materials to the feeding mouth and discharge the fine material from the pipe. The seat of the machine adopts channel steel and body adopts armor plate and the spiral axle adopts cast iron, so it's durable. The lifting equipments have two types, by electricity and hand. There are four types of classifiers, high weir type single and double spiral classifier, immersed single and double spiral classifier.
Â
Application for spiral classifier mining
Spiral classifiers are widely used for distributing ore in the close circuit with ball mill, grading ore and fine slit in the gravity mill, grading granularity in the flow of metal ore-dressing and desliming and dehydrating in the washing.
 
Â
Spiral Classifier-Working Principle
The grinded pulp is fed into tank from the inlet in the middle of settlement region, and the slurry classification
sedimentation area is under the inclined tank. The spiral with low speed rotation stirs the slurry, so that the fine
particles rise, and the coarse particles sinks to the bottom of tank. Overflow weir is above the bearing center
which is under screw shaft, and is underneath overflow end.
Structure for China supplier spiral classifier
High weir spiral classifier as the ancillary equipment of grinding to pre-classifying and check classifying is also
applied in de-mudding and dewatering.
Our spiral classifiers are widely used in the distribution of ore in closed circuits with ball mills, grading ore and
fine slit in gravity mills, grading granularity and flow of metal ore- dressing, and de-sliming and dehydrating in
washing.
Advantages for spiral sand removing machine
1.Simple structureÂ
2.Reliable working conditionÂ
3.Dehydrating in the washingÂ
4.Convenient operation
Specification for China supplier spiral classifier mining spiral sand removing machine for high clay sand
Model |
Spiral diameter(mm) |
Spiral rotation speed(r/min) |
Trough length(mm) |
Motor power(KW) |
Dimensions(mm) |
Weight |
|||
For driving |
For lifting |
L |
W |
H |
|||||
FG-3 |
300 |
12-30 |
3000 |
1.1 |
/ |
3850 |
490 |
1140 |
0.7 |
FG-5 |
500 |
8-12.5 |
4500 |
1.1 |
/ |
5430 |
680 |
1480 |
1.6 |
FG-7 |
750 |
6-10 |
5500 |
3 |
/ |
6270 |
980 |
1820 |
2.7 |
FG-10 |
1000 |
5-8 |
6500 |
5.5 |
/ |
7590 |
1240 |
2380 |
4 |
FC-10 |
1000 |
5-8 |
8400 |
7.5 |
/ |
9600 |
1240 |
2680 |
6 |
FG-12 |
1200 |
4-6 |
6500 |
7.5 |
2.2 |
8180 |
1570 |
3110 |
8.5 |
FC-12 |
1200 |
4-6 |
8400 |
7.5 |
2.2 |
10370 |
1540 |
3920 |
11 |
2FG-12 |
1200 |
4-6 |
6500 |
15 |
4.4 |
8230 |
2790 |
3110 |
15.8 |
2FC-12 |
1200 |
4-6 |
8400 |
15 |
4.4 |
10370 |
2790 |
3920 |
17.6 |
Company Information
Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team.
With 32% market share in China and the rest to overseas, already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc..Â
We are expert especially at mining separating and lab mining plant, main products as below:
Gold trommel wash plant
Shaking table
Spiral chute separator
Centrifugal gold concentrator
Jig separator machines
Waste recycling machine
Grinding and mill crusher
Flotation cell machine
Magnetic separator
Laboratory mining plant
Our Services
1. One year guarantee.
2. Sample testing.
3. our technician can design your project based on your information such as flow chart.
4. Engineer available for over seas installation and training.
5. after sale service, such providing spared parts.
Â
FAQ
Q: Are you a manufacturer of spiral chute?
A: Yes, we are manufacturer of spiral chute and have our own factory, located in Shicheng, Ganzhou, Jiangxi.
Â
Q: What is the warranty of spiral chute?
A:Â 1 year.
Â
Q: will you help to install spiral chute machinery?
A:Â If you need, we will have our technicians to assist you for installation.Â
Â
Q:Could your company provide customized products?
A: Yes. OEM is welcome.
Contact
Brief introduction for spiral classifier
According to the principle that different grains are with different specific gravity and sedimentation rate in the liquid, the fine ore flows in the water and the coarse ore sinks in the bottom. The classifier that has machine grading by discharging from the top can filtrate the materials and send coarse materials to the feeding mouth and discharge the fine material from the pipe. The seat of the machine adopts channel steel and body adopts armor plate and the spiral axle adopts cast iron, so it's durable. The lifting equipments have two types, by electricity and hand. There are four types of classifiers, high weir type single and double spiral classifier, immersed single and double spiral classifier.
Â
Application for spiral classifier mining
Spiral classifiers are widely used for distributing ore in the close circuit with ball mill, grading ore and fine slit in the gravity mill, grading granularity in the flow of metal ore-dressing and desliming and dehydrating in the washing.
Â
Â
Spiral Classifier-Working Principle
The grinded pulp is fed into tank from the inlet in the middle of settlement region, and the slurry classification
sedimentation area is under the inclined tank. The spiral with low speed rotation stirs the slurry, so that the fine
particles rise, and the coarse particles sinks to the bottom of tank. Overflow weir is above the bearing center
which is under screw shaft, and is underneath overflow end.
Structure for China supplier spiral classifier
High weir spiral classifier as the ancillary equipment of grinding to pre-classifying and check classifying is also
applied in de-mudding and dewatering.
Our spiral classifiers are widely used in the distribution of ore in closed circuits with ball mills, grading ore and
fine slit in gravity mills, grading granularity and flow of metal ore- dressing, and de-sliming and dehydrating in
washing.
Advantages for spiral sand removing machine
1.Simple structureÂ
2.Reliable working conditionÂ
3.Dehydrating in the washingÂ
4.Convenient operation
Specification for China supplier spiral classifier mining spiral sand removing machine for high clay sand
Model |
Spiral diameter(mm) |
Spiral rotation speed(r/min) |
Trough length(mm) |
Motor power(KW) |
Dimensions(mm) |
Weight |
|||
For driving |
For lifting |
L |
W |
H |
|||||
FG-3 |
300 |
12-30 |
3000 |
1.1 |
/ |
3850 |
490 |
1140 |
0.7 |
FG-5 |
500 |
8-12.5 |
4500 |
1.1 |
/ |
5430 |
680 |
1480 |
1.6 |
FG-7 |
750 |
6-10 |
5500 |
3 |
/ |
6270 |
980 |
1820 |
2.7 |
FG-10 |
1000 |
5-8 |
6500 |
5.5 |
/ |
7590 |
1240 |
2380 |
4 |
FC-10 |
1000 |
5-8 |
8400 |
7.5 |
/ |
9600 |
1240 |
2680 |
6 |
FG-12 |
1200 |
4-6 |
6500 |
7.5 |
2.2 |
8180 |
1570 |
3110 |
8.5 |
FC-12 |
1200 |
4-6 |
8400 |
7.5 |
2.2 |
10370 |
1540 |
3920 |
11 |
2FG-12 |
1200 |
4-6 |
6500 |
15 |
4.4 |
8230 |
2790 |
3110 |
15.8 |
2FC-12 |
1200 |
4-6 |
8400 |
15 |
4.4 |
10370 |
2790 |
3920 |
17.6 |
Company Information
Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team.
With 32% market share in China and the rest to overseas, already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc..Â
We are expert especially at mining separating and lab mining plant, main products as below:
Gold trommel wash plant
Shaking table
Spiral chute separator
Centrifugal gold concentrator
Jig separator machines
Waste recycling machine
Grinding and mill crusher
Flotation cell machine
Magnetic separator
Laboratory mining plant
Our Services
1. One year guarantee.
2. Sample testing.
3. our technician can design your project based on your information such as flow chart.
4. Engineer available for over seas installation and training.
5. after sale service, such providing spared parts.
Â
FAQ
Q: Are you a manufacturer of spiral chute?
A: Yes, we are manufacturer of spiral chute and have our own factory, located in Shicheng, Ganzhou, Jiangxi.
Â
Q: What is the warranty of spiral chute?
A:Â 1 year.
Â
Q: will you help to install spiral chute machinery?
A:Â If you need, we will have our technicians to assist you for installation.Â
Â
Q:Could your company provide customized products?
A: Yes. OEM is welcome.
Contact
Balloon Arch Kit ,Balloon Garland Kit,Balloon Arch Stand,Rose Gold Balloon Arch
NINGBO YAOTU TRADING COMPANY , https://www.ningboyaotu.com