Use of sewage suction trucks and method for removing scale from tanks

Posted on

Vacuum sewage suction vehicles, also known as sewage suction vehicles and sewage suction vehicles, use vacuum negative pressure principle to suck feces and liquid dirt into vehicle-mounted storage containers to achieve container collection of feces, reduce secondary pollution, and equipped with vehicle-mounted cleaning devices. It is the preferred equipment to improve the level of urban and rural sanitation management and improve the working conditions of sanitation personnel.
Vacuum suction car use:
It is mainly used for sewerage, rainwater wells, inspection wells, septic tanks, and sludge, excrement in manholes or petrochemical plant effluent pools for suction, shipment, and discharge. The suction pump can be self-priming and self-discharging. The sewage suction tank can be hydraulically unloaded and the rear cover can be opened hydraulically. The suction pump has a high vacuum degree and a long suction range.
The vehicle carries out sludge and sewage inhalation operations under high vacuum conditions, paying particular attention to its operation.
      Scale removal method in the tank :
      First, the manual cleaning method: the need to remove the sewage tank, use an artificial hammer, scraping, shovel, etc. to remove scale; descaling, low efficiency, labor intensity, difficult to clean, easy to cause secondary damage to the tank.
      Second, ordinary scale cleaning agent: need to disassemble the water tank, remove incomplete, odor, strong corrosion, easy to cause water tank aging, shorten its service life.
      Third, professional tank descaler: no need to disassemble can be cleaned, but also can be cleaned without stopping. The dedicated scale cleaning agent can be directly poured into the water circulation system. After soaking, idling or 20-30 minutes of running, the water tank and the system's internal scale remover are discharged. Repeated flushing with water can effectively remove the engine water cycle. Scale, rust, mud and various harmful substances in the system.

Cold drawn, Peeled or Turned Ground and Polished Steel Bar

Peeled or turned steel bar is produced by peeling or turning from Hot Rolled Steel Bar. Our advantages and more services of Cold Drawn Steel Round Bar includes:

1) Wide range of diameters from 20mm to 150mm

2) Customized Length from 100mm to 12000mm

3) Good surface roughness: 0.4um to 1.6um

4) Good straightness: 0.5mm/m to 2mm/m

5) Good roundness: 80% of diameter tolerance

6) Diameter tolerance: -0.02mm to -0.1mm / h9, h10, h11

7) Matched further processing: Grinding, polishing, straightening

8) Anti-rusty package

9) Full sets of testing equipment: Surface, Dimenstion. Mechanical properties testing

10) Fast delivery time

Turned and polished Steel Bar,Turned Ground and Polished Steel Round Bar,Centerless Ground Shat,Ground and Polished Round Steel Bar, Peeled Ground and Polished Round Steel Bar

SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.js-luggagecarts.com