Yunnan copper-containing sand basin sedimentary deposits, deposits occur in the interaction of light and sandstone purple band stratoid output, long in the longitudinal direction (inclined) long 719 279cm, minor axis direction ~ 70 ~ 800m, The average is 370m, the thickness is 3.91~5.0m, the inclination angle is 2°~29°, and the vertical depth is about 575m. The ore is stable. According to the natural type of ore and the ore elevation of the ore body, it is divided into three sections: upper, middle and lower sections. The design of the central mining section is planned in advance, and the designed production capacity is 1500t/d, which actually reaches 800~1000t/d.
The deposit is jointly developed by the inclined well of the bucket and the inclined well of the blind bucket (the later section of the lower section of the mine is re-connected with a blind-chain inclined shaft). The development system is shown in Figure 1.
Figure 1 Luding copper mine development system map
1-2JK3×1.5A-20 hoisting machine room; 2-1 #箕斗斜井; 3-JK2.5×2A-20 row hoisting chamber; 4-2 #盲箕斗斜井;
5-Pine ore recovery flat road; 6-1 # , 2 #箕斗斜井Transporting sand bin; 7-1 #箕斗斜井ä¸ä¸ä¸è·¯ä¸ç‚¹;8-1 # material inclined well;
9- measures well; 10-3 # blind material inclined; 11- blind integrated inclined; 12 filling wells; 13- Return Slope; 14 Ida inclined; 15 ore
  Â
1 #箕斗斜井, arched section 10.34~24.07m 2 , inclination angle 14°44′44′′, oblique length 833m, 12t rear unloading bucket lifting, hoist ZJK3×1.5A-20 type, power 260kw. 2 #盲箕斗斜井, arched section 10.34m 2 , inclination angle 11°, oblique length 707m, 箕doutong 1 # inclined well, hoist JK2.5×2A-20 type, power 320kw. Deep skewer blind inclined well The arched section is 10.52m 2 , the inclination angle is 19°, the oblique length is 686m, and it is lifted by the 1.6m 3 side unloading type mine car. The hoist JK2.5/20 type has a power of 350kw.
PTFE fusing Machine Belt
We supply several types of fusing machine belt
1. PTFE seamless fusing machine belt:
the belt is made of high tensile fiberglass or Kevlar, knitted by special equipment and coated with fine PTFE. Seamless belt overcomes former problems of traditional joint fusing machine belt such as bad stability, ruptures, and deflecting for different girth on two sides at the joint. The using life of seamless PTFE Fusing Machine Belt are 3 times more than all kinds of joint PTFE Fusing Machine Belt.
2. Double-layer compound fusing machine belt:
with static-resistance varnished cloth inside and tearing-resistance fiberglass cloth outside, the belt has a great improvement on its intensity, long using life, well balanced thickness, excellent deflecting preventing capacity, smooth surface, it`s better for super thin fabric fusing.
3. Common seam fusing machine belt:
Seam fusing machine belt is made of imported materials. The surface is smooth and luster and the price is competitive.
Fusing Machine Belt,PTFE Fusing Machine Belt,PTFE Seamless Fusing Machine Belt
Taizhou Kaicheng Synthetic Material Co.,Ltd , https://www.kc-ptfefabrics.com