2. Influence of wind speed on equipment: When the filtering wind speed is high, the filtration area and volume can be reduced, the floor space can be reduced, and the investment can be reduced. However, the high selection of filtration wind speed will affect the dust removal efficiency, increase the difficulty of cleaning, increase the filtration resistance, reduce the service life of the dust filter bag, and bring about an increase in operating and maintenance costs. In fact, choosing wind speed is a more complicated task. It is not enough to treat the above advantages and disadvantages in isolation. It is most important to solve this problem. Wind speed on the problem of dust removal accessories: In recent years, in the case of increasingly strict environmental protection requirements, in the design of bag dust removal equipment , it is very important to properly select the filter wind speed of the dust collector.
3. Increasing the influence of wind speed: Under the premise of changing the air volume, increasing the filtration speed can save the filter material and improve the processing capacity of the filter material. However, after the filtration speed is increased, the resistance of the equipment is increased, the energy consumption is increased, and the running cost is increased. If the filtration speed is too high, the dust accumulated on the filter bag is laminated to increase the filtration resistance. Due to the large pressure difference between the two sides of the filter bag, the fine dust penetrates into the filter material and even penetrates the filter material, so that the dust concentration at the outlet increases. High filtration wind speed will also lead to the rapid formation of dust layer on the filter material, causing excessively frequent cleaning, increasing the energy consumption of cleaning and shortening the service life of the filter bag.
4. What is the impact of low wind speed: at low filtration speed, the pressure loss is small and the efficiency is high, but the required filter bag area is also increased, and the volume, floor space and investment cost of the dust collector are also increased. In general, dust that is finer or difficult to trap, has a high temperature of the dust-containing gas, a high dust concentration, and a low filtration rate when the moisture content of the flue gas is large.
Food-grade 85 phosphoric ACID has a clear appearance and no odor. The liquid has a thick consistency and can be easily dissolved in water. The density of this chemical is about 1.67 kg/l. Phosphoric acid food-grade 85 is highly acidic with a pH level less than 1.
Properties:
colorless and transparent viscous liquid. It is odorless, sour, melting point 42.35 ℃, easily soluble in water, soluble in ethanol, can irritate the skin and cause inflammation, destroy body tissues, and have hygroscopicity.
Uses:
Used as sour agent and yeast nutrient, can be used as seasoning, canned, refreshing drink sour agent, used as yeast nutrition source when brewing, to prevent multiplication of bacteria.
Phosphoric acid is mainly used in the manufacture of various phosphate, such as ammonium phosphate, potassium dihydrogen phosphate, disodium hydrogen phosphate, trisodium phosphate, etc and condensation phosphate class.
It should be stored in a cool, ventilated warehouse. In high-concentration phosphoric acid, it is necessary to pay attention to heat preservation in cold regions in winter to prevent freezing and leakage of containers. Do not store and transport together with alkalis, toxic materials and other corrosive materials. Protect from rain and direct sunlight during transportation. Handle with care during loading and unloading. Violent impact is strictly prohibited to prevent the packaging container from rupturing. In case of fire, dry sand or dry powder fire extinguisher can be used for fighting.
Phosphoric Acid Food Grade,Phosphoric Acid For Plating ,Food Grade Phosphoric Acid,Industry Grade Phosphoric Acid
HENAN JINHE INDUSTRY CO.,LTD , https://www.hnchromiumoxidegreen.com