- Upgrade square wave power source, current with high speed through the zero, arc is stable no high frequency stabilizer is necessary.
- Good arc stiffness, heat concentrated, easy to fill wire, is especially suitable for filller wire welding in bicycle industry.
- Super oxide film clean capability, clean time is adjustable steplessly, beautiful and bright welded seam.
- Has connector to foot control, convenient for workers's operation.
- Built in over current, over heat, over voltage, low voltage alarm and protection circuit, safe and reliable when operating.
- High duty cycle, may work continuously with high current.
- Suitable for welding aluminum and its alloy, carbon steel, stainless steel, copper, titanium etc.
Parameter/Specification
Â
|
Model Item      |
TIG 200P AC/DC |
| Voltage(V) | AC220V ±15% |
| Frequency(Hz) | 50-60 |
| Input Power(KVA) | 5.8 |
| No-load Voltage(V) | 56 |
| Current Range(A) | 10-200 |
| Rated Duty Cycle | 60% |
| Applied Welding Rod(mm) | ¢1.6-4.0 |
| Pre-flow time(S) | 2 |
| Post-flow time(S) | 0-10 |
| Down slope(S) | 0-10 |
| AC Balance(%) | 20-80 |
| AC Frequency(Hz) | 60 |
| Pulse Frequency(Hz) | 0.5-300 |
| Power Factor | 0.73 |
| Efficiency(%) | 85 |
| Insulation Grade | F |
| Housing Protection Grade | IP21S |
| Weight(Kg) | 20 |
| (L*W*H)(mm) | 500*335*315 |
| Carton CBM(m3) | 0.115 |
| Specification | |
| Â Capacitor | 470uF/400V*4 |
| MOSFET | 23N50E*12 |
| Output Rectifier | D92-02*12 |
         FRONT VIEW
         ACCESSORY
           LEFT VIEW
            RIGHT VIEW
           TOP VIEW
    BACK VIEW
 Performance and Features:                                              Â
- Upgrade square wave power source, current with high speed through the zero, arc is stable no high frequency stabilizer is necessary.
- Good arc stiffness, heat concentrated, easy to fill wire, is especially suitable for filller wire welding in bicycle industry.
- Super oxide film clean capability, clean time is adjustable steplessly, beautiful and bright welded seam.
- Has connector to foot control, convenient for workers's operation.
- Built in over current, over heat, over voltage, low voltage alarm and protection circuit, safe and reliable when operating.
- High duty cycle, may work continuously with high current.
- Suitable for welding aluminum and its alloy, carbon steel, stainless steel, copper, titanium etc.
Parameter/Specification
Â
|
Model Item      |
TIG 200P AC/DC |
| Voltage(V) | AC220V ±15% |
| Frequency(Hz) | 50-60 |
| Input Power(KVA) | 5.8 |
| No-load Voltage(V) | 56 |
| Current Range(A) | 10-200 |
| Rated Duty Cycle | 60% |
| Applied Welding Rod(mm) | ¢1.6-4.0 |
| Pre-flow time(S) | 2 |
| Post-flow time(S) | 0-10 |
| Down slope(S) | 0-10 |
| AC Balance(%) | 20-80 |
| AC Frequency(Hz) | 60 |
| Pulse Frequency(Hz) | 0.5-300 |
| Power Factor | 0.73 |
| Efficiency(%) | 85 |
| Insulation Grade | F |
| Housing Protection Grade | IP21S |
| Weight(Kg) | 20 |
| (L*W*H)(mm) | 500*335*315 |
| Carton CBM(m3) | 0.115 |
| Specification | |
| Â Capacitor | 470uF/400V*4 |
| MOSFET | 23N50E*12 |
| Output Rectifier | D92-02*12 |
         FRONT VIEW
         ACCESSORY
           LEFT VIEW
            RIGHT VIEW
           TOP VIEW
    BACK VIEW
Â
Machined Parts&Custom machined parts
Our company's subsidiary (Aoffide) mainly processes the following parts:
1. Processing of various mechanical parts such as military industry, petroleum, medical treatment, environmental protection, electronics, etc.
2. Design and manufacture of fixtures.
3. Design, manufacture and processing of stainless steel sheet metal processing, various workbenches, clean operation tables, and trolleys. The company owns more than 10 CNC machining centers such as Mikron from Switzerland, Mazak from Japan, Fenghe from Japan, Doosan from South Korea, Youjia from Taiwan, and Jingdiao from Beijing. It has more than 20 CNC machine tools such as Doosan, Taichung Precision Machinery, Shenyang Machine Tool, and Kingswood CNC. In addition, there are processing equipment such as electric pulse, wire cutting machine, shearing machine, bending machine and so on.
Passed the ISO9001 quality system certification in January 2015.
Machined Parts&Custom Machined Parts,Cnc Precision Machined Parts,Custom Made Cnc Machining,Cnc Automobile Parts
Jiangyin Mitoo Precise Co.,Ltd. , https://www.mitoosteel.com