The reasons that fiber laser cannot resist S&A dual temperature water chiller

One of our customers mainly engaged in the production of 3D laser printing machine has placed an order for S&A water chiller. S&A recommends CW-6100 dual temperature water chiller to this customer, who wants to cool the 1000W fiber laser on a fiber laser welding machine.
With up to 4200W cooling capacity and ±0.5℃ precisely temperature control, S&A CW-6100 dual temperature water chiller has two temperature control modes that can be applied in different occasions. Why has S&A dual temperature water chiller been recommended to cool the optical fiber transmission welding machine? What advantages does S&A dual temperature water chiller have in cooling the fiber laser?
According to the cooling requirement of the fiber laser market, S&A launches dual temperature series water chiller for multiple purposes. As this type of water chiller can simultaneously cool both of the main body of laser and the lens, it can increase the space utilization with easy movement to save the cost. Also S&A CW-6100 water chiller has been equipped with a triple filter unit, where two wire-wound filters are separately used to filter the impurities in the cooling water circuits at the high temperature end and the low temperature end to guarantee the cleanness of water, while the third deionization filter mainly serves to filter out the ions in the water circuits to better protect the fiber laser.
According to our experience in S&A water chillers, more S&A models for fiber lasers are at your choice:
Recommend S&A CW-6000 water chiller to cool 300W-500W fiber lasers;
Recommend S&A CW-6200 water chiller to cool 1000W-1200W fiber lasers;
Recommend S&A CW-6250 water chiller to cool 1.5KW fiber lasers;
Recommend S&A CW-6500 water chiller to cool 2000W fiber lasers;
Recommend S&A CW-7800 water chiller to cool 4000W-6000W fiber lasers;
For the center of an industrial water chiller---condenser, S&A has invested millions of money in the equipment for the production and made strict control on a series of processes, including fins, bends and welding etc to secure the quality of condenser. Meanwhile, with the introduction of welding robots, the welding procedure has been significantly improved and perfected, which also has efficiently prevented the machinery breakdown caused by solder skips to better secure the stable quality of S&A water chiller. With the introduction of IPG fiber laser cutting machine for the cutting of external metal plates on the water chiller and the punching of holes on the machine parts, it has not only improved the work efficiency and technology, but also enhanced the appearance of S&A water chillers.
The technical parameter of CW-6100AT: http://Products/ChillerCW6100ATdualt.html