Super Cone Rubber Fender / Marine Fender (TD-AA600H)

• Model NO.: TD-AA600H
• Shape: Cone Type
• Type: Inland and Coastal Boats
• Usage: Ship Launching, Protection
• Trademark: TIANDUN
• Specification: SGS, BV, ISO9001, H600

• Material: Rubber
• Size: 600h
• Marine Parts: Fender, Bumper
• Certification: BV, ISO9001, CCS, SGS
• Transport Package: Export Packing
• Origin: Qingdao, China

Description:
L Wide range of sizes
L PIANC tested and certified
L Standard and intermediate rubber grades
L High efficiency
L Good angular performance

TD-AA cone type rubber with cone shaped rubber and frontal mount steel frame is the 3rd generation product of cell type rubber. Adopting cone rubber and full-new structure design of preposed steel structure, it is one of most excellent performance fender in that designed compress deformation rise from 52.5% to 70% if reaction force do not increase. Its emergence simplifies wharf structure and reduces the cost of quay wall construction, hence it is and ideal substitute of cell type rubber fender.

Applications:
The cone rubber fender is rarely damaged or impaired, because it never contacts the hull directly.
The utilization scope:
1). Suitable to the quays need low reaction force and high energy absorption;
2). Specially suitable to the quays require low hull pressure;
3). Suitable to oil terminal, container terminal and offshore berths;
4). Suitable to any case using super cell fenders.

Competitive Advantage:
1. The energy absorption doubles comparing with the super cell rubber fender with same spec.
2. In the case with similar reaction force and energy absorption, small size TD-AA cone type fender can substitute relative large TD-A super cell type fender.
3. In the case of oblique berthing (less than a angle of 10° ), the performance can not be reduced, which is preferred to TD-A model.
4. The frontal frame (steel frame) are installed in front of fenders, which can reduce the surface pressure against vessel hull. The surface can be limited below 25t/m2, which is suitable to large vessel especially.
5. The super high density polyethylene pads are adhered to the frontal frame, which can reduce the friction factor between hull and fender to below 0.2, and can reduce the shear (horizontal force) exerted on fenders when vessel berth, which can prolong the service life of fenders.
6. The frontal frame adopts water-tight structure with high strength and better anti-rust performance.

Smart Glass Installation Robot

Smart Glass Installation Robot is a machine can Move ,lift ,Rotate ,tilt and Vacuum grab Automatic . It's a perfect machine apply to install glass window ,install glass curtain wall on buildings of airport ,exhibition lobby ,hotel ,museum,shopping mall ect. Only one person can complete all works , and all function controlled by remote . It can adjust the installation angle accurately . It's very smart and effience . And this series we have Several model from load capacity 300kg to max 1200kg . Working in outside ground or enter elevator reach to inside floor. This Vacuum lifter Robot Supplied by 2 pieces of big capacity Batteries power. it can working 6~8 hours continuity. The smart installation Robot can handling Various size of Glass panels even arc glass with difference suctions head .

The smart installation Robot also can use in stone panels installation ,and other metal sheet handling . Before the Vacuum lifter Robot had been developed ,usually one set 800kg glass unit need 7~8 people lifting by hand and there are also very dangerous. Now it's more safety and more save labor using the Glass Installation Vacuum lifter Robot

Glass Installation Robot,Glass Installation Vacuum Lifter,Professional Glass Lifter,Mobile Glass Lifter,Glass Lifting Equipment

Guangzhou Cowest Machinery Equipment Co.,ltd. , https://www.cowestmac.com