The domestic deoxidation tower was successfully developed by China Nonferrous Metals Institute. At present, it is mainly from Liaozhong, Inner Machinery, Zhuyuan and Dairy. Zhaoyuan Huangji General Factory produces Φ700×3000 and Φ1400×4400 deoxygenation towers.
With gold in the cyanide process, the dissolved oxygen in the liquid is expensive, harmful for the zinc substitution. The vacuum deoxidation tower is an ideal equipment for deoxidation. It has a simple structure and convenient operation. It can reduce the oxygen content in the noble liquid to below 0.5g/m 3 and the deoxidation rate to over 95%.
The working principle of the deoxidizing tower is that the solution is sucked into the top of the tower by vacuum, and is sprayed onto the packing layer through the shower. Under the action of vacuum, the dissolved gas in the liquid is taken out to achieve the purpose of deoxidation.
Its technical characteristics and specifications are shown in Table 1.
The outer dimensions of the Φ1500×3600 deoxygenation tower are shown in Fig. 1.
The deoxidation tower produced by Xinhai Mining Machinery is mainly divided into three kinds according to different fillers, namely, wooden lattice filler, point wave filler and new plastic mesh filler. The new plastic mesh filler is a new product developed by the company, which solves the disadvantages of the deoxidation effect of the point wave filler due to the calcium plugging effect of the alkaline cyanide solution. Its technical performance is shown in Table 2.
Jilin Exploration Production vacuum deaeration tower is a major process for cyanide gold zinc dust in your ideal dissolved oxygen was removed prior to extraction containing gold and silver. The device has a simple structure and a liquid level automatic adjusting mechanism in the tower. The operation is convenient and reliable, and the oxygen content in the noble liquid can be reduced to below 0.5 g/m3, and the deoxidation rate can reach over 95%.
Working principle: the noble liquid is sucked from the top of the tower by vacuum, and is sprayed onto the packing layer by the sprayer. Under the action of vacuum, the dissolved gas in the liquid is removed, thereby achieving the purpose of deoxidation.
A schematic diagram of the structure is shown in Figure 2, and the technical parameters are shown in Table 3.
   Table 1  Table 2  table 3
   figure 1  figure 2
Series Steel Structure Industrial Cooling Tower
Tower structure: all steel structure, tower skeleton, cloth water system, climbing ladders, guardrails are Q235-B material, anti-corrosion using hot-dip galvanizing, surround panel for glass Glass steel.
Windpipe: kinetic energy recovery type, air flow organization is reasonable, high efficiency;
Fan: Wing-type adjustable cooling tower dedicated shaft fan, blades are aluminum alloy or glass steel.Motors,
gearboxes: YE2 series outdoor energy-efficient energy-saving motors, protection class IP55, insulation class F-class.
Filler: modified PVC raw material thin belly filler, high temperature, aging, flame retardant, bonding into a block strength.
Water receiver: the use of high-efficiency low-resistance rib arc water receiver, modified PVC material pull squeeze molding, water collection effect is significant, the drift rate is less than 0.01%.
The fan system tower is equipped with motors, gearboxes, fan access platforms and passageways, and there are climbing ladders and guardrails outside the tower.
Pool: This tower's pool and foundation, pre-buried steel plate, etc. by the user is responsible for, the water level should be controlled at -0.25-0.3m as well.
Applied to petroleum, chemical, metallurgy, medicine, electricity and other industrial large water circulation system.Series Steel Structure Industrial Cooling Tower,Industrial Water Cooling Tower,Industrial Cooling Tower,Mechanical Cooling Tower
Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhou-arkfluid.com