It is understood that China's Wuxi Fuel Pump Yuzu Research Institute has signed a cooperation agreement with Ricardo to promote Ricardo's rapid development in the Chinese engine market, while Ricardo will rely on his extensive experience in developing engine technology for the international market. The development of the Wuxi Oil Pump Nozzle Research Institute is promoted through technology-based consulting services and support.
As an international consulting partner of the Wuxi Fuel Pump Mesh Research Institute, Ricardo’s engineers will visit the Institute on a regular basis to exchange views on advanced technologies and development strategies adopted by the global automotive industry. In this case, Ricardo will specifically advise on the facilities, methods, and technologies that best suit the Chinese market and best suit the requirements of the Institute's business. The Wuxi Oil Pump Nozzle Research Institute and Ricardo agreed that the cooperation in the next few years will enable both parties to form a broad alliance in advanced technology projects.
“Ricardo and the Wuxi Fuel Pump and Yoke Institute are working together to develop next-generation technologies and products to increase vehicle fuel efficiency and reduce emissions,†said Mark Garrett, executive director of Ricardo, when signing the bilateral cooperation agreement. Indicated. “In the advanced field of fuel injection systems, the Wuxi Fuel Pump Tip Research Institute is a recognized leader in China. We look forward to working with them and working together to meet some of the key challenges facing the Chinese engine industry.â€
At the same time, Zhu Jianming, Director of the Wuxi Fuel Pump and Yoke Institute, also stated that the signing of this agreement with Ricardo marks a new stage in the cooperation between the two companies and expects the two parties to establish a successful and long-term mutually beneficial business relationship.
Fiberglass duct rodder is an excellent auxiliary tool for pulling the guide rope in the pipeline. The smooth and elastic surface allows the perforator to pass through the narrow channel easily. The FRP duct rodder consists of three parts: copper core, glass fiber reinforced layer and high-pressure low-density polyethylene protective layer (smooth, firm and resistant to harsh environment). The copper core conductor enables the poke bar to be easily placed in different ways.
The frod diameter is 11-18mm, the rod length is 100-500m, the temperature range is -40℃ to +80℃, the minimum bending radius is 295mm, the traction breaking tension is 4.5t, the linear density is 150g/m, the length is 30m, 40m, 60m, 80m and 120m. The snake duct rod is mainly used for traction guide rope, cable and wire in sewer pipeline and wall pipeline.
In the early days, the fiberglass duct rodder was mainly used for traction under the wall, and later developed into the optical cable line of sewer. Wait for the traction of the line. The fiberglass duct rodder has the advantages of time-saving, labor-saving and improving work efficiency. It can be used for cleaning telecommunication pipelines and laying optical cables, cables and plastic sub pipes. When in use, the FRP cladding rod is first led out from the guide wheel, then connected with the corresponding metal head and penetrated into the pipeline. When used for cleaning, the guide head drives the cleaning tool to clean the pipeline; When laying cables, steel wire or iron wire can be brought in first, and then the cable can be pulled into the pipe with steel wire or iron wire.
Fiberglass Duct Rodder, Snake Duct Rod, FRP Snake Rod, FRP Duct Rodder, Fiberglass Duct Rod
Taizhou Haoxin Electric Power Machine Co., Ltd. , https://www.hxstringingequipments.com