LD400T Asphalt Mixing Equipment
Thanks to the macroeconomic regulation of the country, the Ministry of Transport plans to invest in the construction of highways and railways in the next five years to stimulate consumption and boost domestic demand. Therefore, domestic customers’ prophets have made clear the purpose of many audiences. They are mainly aimed at large-scale mixing equipment such as Type 4000 and 5000. Type visit. There are many customers who asked the company's LD400 strong mixing before the company booth: What is "parallel measurement"? Is your own design? What is the help for production and metering? After the on-site service personnel answered in detail, they all expressed their appreciation.
"Vulcan" third-generation intelligent pulverized coal burner
After the BMW show ended, a Vietnamese customer signed a LBQ2000 strong mixing contract with the company. Indian customers visited the company and signed a product agency agreement. Reached a preliminary agreement for large-scale mixing equipment to 20 sets.
The participation of BMW Exhibition, from production, shipping, installation, booth construction, to customer reception, fully reflects the overall image of Lude people with high quality, high quality, and high efficiency, which enhances Lude's brand effect and enhances market competitiveness. . After careful planning of the company, it has received satisfactory results and played a good role in promoting domestic and foreign sales of Lu De Zhuji products.
Solenoid valve is an industrial equipment controlled by electromagnetism. It is an automatic basic component used to control fluid. It belongs to actuator. Pneumatic solenoid valve is one of them. It blocks or leaks different oil drain holes by controlling the movement of valve body. The oil inlet hole is normally open, and hydraulic oil will enter different oil drain pipes, Then the oil pressure of the pneumatic solenoid valve pushes the piston of the oil cylinder. In this way, the mechanical movement of the whole solenoid valve is controlled by controlling the current of the electromagnet of the pneumatic solenoid valve.
Characteristic
It can work normally under vacuum, negative pressure and zero pressure, but its diameter is generally less than 25 mm.
It can also operate under zero pressure difference, vacuum and high pressure, but it has high power and must be installed horizontally.
The upper limit of fluid pressure range is high, which can be installed arbitrarily (need to be customized), but the condition of fluid pressure difference must be met.
Principle editing voice
There is a closed cavity in the pneumatic solenoid valve, and there are through holes in different positions. Each hole of the pneumatic solenoid valve leads to different gas pipes. There is a valve in the middle of the cavity and two electromagnets on both sides. The valve body will be attracted to which side when the magnet coil is electrified;
The pneumatic solenoid valve blocks or leaks different exhaust holes by controlling the movement of the valve body, and the air inlet is normally open. High pressure gas will enter different exhaust pipes, and then push the piston of the cylinder through the air pressure of the pneumatic solenoid valve. In this way, the mechanical movement of the whole solenoid valve is controlled by controlling the current of the electromagnet of the pneumatic solenoid valve.
Operation principle of pneumatic solenoid valve
We said the pneumatic solenoid valve working position (solenoid valve on or off), in fact, refers to the pneumatic solenoid valve spool position.
Pneumatic Solenoid Valve, Pneumatic Air Solenoid Valve, Electronic Solenoid Air Valve
Glove Industry Co.,Ltd. , https://www.glovemech.com