In my case, the two cinnabars are red, dense, brittle, and naturally floatable. They can be pre-selected, re-elected, floated or combined in several ways.
1. The pre-selection of 1 mercury ore is a traditional pre-selection method. The cinnabar is red or dark red, which is easy to identify with surrounding rock and gangue minerals. The hand selection is usually on a hand-selected belt with a belt speed of 0.1 to 0.4 m/s. Hand-made, large ore hand selection, sometimes also set up a special hand selection station before the rough break, hand-selected grain size is generally 50 ~ 100mm size. 2 Breaking screening is another pre-selected method for mercury ore. Like all the brittle minerals, cinnabar is enriched in the fine-grained ore during the crushing process, and the appropriate mesh size is selected for grading, and the sieve level is discarded to achieve the pre-selection purpose.
2. The re-selection of mercury ore is significant, which is conducive to the treatment by re-election method. However, in the production practice, the separate re-election process is generally not used to treat mercury ore, and the heavy-floating combined process is generally adopted. The re-election equipment for mercury ore is most commonly used as a shaker and a jig. The jig is used to treat the grade of the sieve that is pre-screened before the ore is milled. The shaker can obtain a high-grade concentrate for the production of cinnabar.
3. Flotation flotation is the most common and effective beneficiation method in mercury ore beneficiation. Flotation can not only effectively recover cinnabar in ore, but also effectively recover various mercury minerals such as natural mercury, chlorsulfurite ore. flotation is also used to treat mercury-containing multi-metal ore. Mercury ore flotation plant equipment, domestic selection plants mostly use small and medium crushing equipment and mechanical agitating flotation machine. A few flotation columns are used as roughing equipment, and their technical and economic indicators are similar to those of mechanically agitated flotation machines. Some large foreign manufacturers choose self-grinding machines and large flotation machines.
4. Heavy-floating combined process beneficiation Heavy-floating combined process beneficiation process is very common in mercury ore dressing plants. Most of China's cinnabar products are from the mercury ore dressing plant of this process. The beneficiation process is that after the crushed ore is coarsely ground by a rod mill, the products are not classified, and the trapezoidal jig is used for sorting. This procedure is applicable to ores with thicker cinnabar inlays and relatively simple composition. The advantages are simple process, low water and electricity consumption, and the dehydration process can be omitted between re-floating operations, so the production cost is low and the capital investment is less. The total recovery rate is high.
There are many grades of PVC. The viscosity or K value commonly used in the industry indicates the average molecular weight (or average degree of polymerization) of PVC, that is, the length of the PVC molecular chain, which determines the grade of the resin and the corresponding processing parameters. The molecular weight of the resin is related to the physical and mechanical properties of the product.
PVC Resin is a kind of non-crystalline linear polymer compound. The larger the relative molecular mass, the higher the viscosity, the higher the molecular weight, and the higher the tensile strength, impact strength, and elastic modulus of the product, but the flow of the resin melt Decline in sex and plasticity. The viscosity number is usually used to indicate the molecular weight of the polymer, and the polymer model is divided
PVC used to be the largest general-purpose plastic in the world, and it is widely used. It is widely used in construction materials, industrial products, daily necessities, floor leather, floor tiles, artificial leather, pipes, wires and cables, packaging films, bottles, foam materials, sealing materials, fibers, etc
SG3 (K-70, S1300): mostly used for soft products, hoses, wires and cables, films, shoe materials, toys, auto parts etc.
PVC RESIN SG3 has high purity, less fish eyes, easy to blister, high temperature resistance, insulation, soft product texture, etc. It is mainly used to produce soft products such as wires and cables, agricultural films, conveyor belts, and daily plastic products.
PVC RESIN SG3,Pvc Resin Sg3 Sg5 Sg8,Pvc Resin K70,Pvc Resin Powder Sg3,Suspension Pvc Resin Sg3
Henan Shunbang Chemical Industry CO.,Ltd , https://www.pvcresinchemical.com