International experts survey, grounding gas, more applicable
At the beginning of 2017, Foton Cummins and Cummins U.S. experts conducted international technical exchanges and actively discussed Cummins Power's new technologies. They repeatedly discussed and approached customers and asked for problems.
Lively discussion
On February 16, 2017, four senior foreign experts from Cummins went to Nanhe County, Xingtai City, Hebei Province to conduct an investigation. They conducted in-depth interviews with the big customer Han boss, came to the workshop trench, climbed up and down to check the status of the vehicle. Every meticulous action at the scene allows customers to really feel the rigorous and serious work style. After learning that the foreigners at the scene were all top experts, the on-site Han boss said with emotion: “I’m also convinced that the quality of Fukang ISG is getting better and better, and I’m still going Kang Auman car. "
Expert and customer photo
New technology application, more convenient and more efficient
The 2017 Fukang Excellent Outsourcing Service Consultant Training and Exchange Conference was held in Taiyuan, Hefei and Tianjin as scheduled. The new IPT technology became the highlight of the conference.
2017 East China Fukang Excellent Consultant Training Conference
The so-called IPT is the abbreviation of Injector Performance Test (Injector Performance Test), as the name suggests is for the injector test, through the Cummins insite diagnostic ECM diagnostic test "fuel injector performance test", namely IPT, in The operation of the engine on the computer to detect the quality of the fuel injectors only takes about five minutes to determine if there are any problems with the engine's six-cylinder fuel injectors. This is convenient and quick, and reliable and accurate.
Injector performance test
In order to make our external consultants more fully and proficiently, experts from the Cummins fuel system US headquarters came to China to participate in these three training exchanges and conducted comprehensive and systematic training on the theory and practice of IPT.
U.S. experts visit local key service stations
After the training, U.S. experts visited the local key service stations and went deep into the front line of service to allow more maintenance personnel to understand the use of IPT functions, to be able to proficiently operate IPT functions, and to improve the overall after-sales service level. After training, service station maintenance personnel generally reflected that the IPT function helped the after-sales maintenance.
Fittings And Parts Of Crushing Machines
There are several fittings and parts commonly found in crushing machines, including:
1. Jaw Plates: These are the main wear-resistant parts of the crushing machine. They are fixed on the jaw body and provide the crushing surface for the material.
2. Toggle Plates: These plates are connected to the toggle beam and help in adjusting the opening of the crusher. They also protect the machine from overloading.
3. Eccentric Shaft: This is a critical component that provides the rotational motion to the jaw crusher. It is usually made of high-grade forged steel and is responsible for transmitting the crushing force to the material.
4. Flywheel: The flywheel is a heavy metal wheel attached to the eccentric shaft. It helps in maintaining the momentum of the crushing machine and reduces the load fluctuations during the crushing process.
5. Bearings: Bearings are used to support the rotating components of the crushing machine, such as the eccentric shaft and the flywheel. They ensure smooth operation and reduce friction.
6. Crushing Chamber: The crushing chamber is the space between the fixed jaw plate and the movable jaw plate. It is where the actual crushing of the material takes place.
7. Wedges: Wedges are used to adjust the gap between the fixed and movable jaw plates. They help in controlling the size of the crushed material.
8. Springs: Springs are used to provide the necessary force for the jaw plates to return to their original position after crushing the material.
9. Belt and Pulley System: This system is used to transmit power from the motor to the crushing machine. It consists of a belt connected to the motor and pulleys attached to the flywheel and eccentric shaft.
10. Guard Plates: Guard plates are used to protect the crushing machine from damage caused by foreign objects or excessive wear.
electrical crusher fittings, stone crusher fittings, mineral crusher fittings
SiChuan TieYing Machinery Manufacturing CO.,LTD; , https://www.tieyingcrushers.com