Inclined shaft bucket lifting is mainly used for large and medium-sized mines. Inclined well inclination is generally 30 ° ~ 40 ° .
    The layout of the inclined well of the bucket and the technical requirements for the inclined shaft can refer to the relevant regulations of the inclined shaft of the truck. At the same time, the following special requirements for the lifting of the inclined shaft of the bucket should also be considered:
    ( 1 ) Mines with large ore aggregates and large production scales, in order to extend the service life of the buckets and increase the bucket lifting capacity, underground crushing stations should generally be installed;
    ( 2 ) The bucket well shall not double as an entry into the wind well;
    (3 ) Line layout: Double-dip bucket inclined shafts are generally laid in two lanes. Only one level of mining can be arranged with one or three rails, and a double-track stagger in the wellbore;
    ( 4 ) Improve the yard line type: Under the condition of many loading points and short transportation lines, the loading and unloading station is double line; or only a single line yard, only one funnel gate is installed at the loading point, which can reduce the diverticulum at the loading point. Quantity of work;
    ( 5 ) The inclined shaft of the bucket should be equipped with corresponding diverticulum, such as loading equipment chamber, mine warehouse, signal chamber, shelter room, sprinkling mine clearing roadway and water pumping room .
    The layout of the inclined well of the bucket and the technical requirements for the inclined shaft can refer to the relevant regulations of the inclined shaft of the truck. At the same time, the following special requirements for the lifting of the inclined shaft of the bucket should also be considered:
    ( 1 ) Mines with large ore aggregates and large production scales, in order to extend the service life of the buckets and increase the bucket lifting capacity, underground crushing stations should generally be installed;
    ( 2 ) The bucket well shall not double as an entry into the wind well;
    (3 ) Line layout: Double-dip bucket inclined shafts are generally laid in two lanes. Only one level of mining can be arranged with one or three rails, and a double-track stagger in the wellbore;
    ( 4 ) Improve the yard line type: Under the condition of many loading points and short transportation lines, the loading and unloading station is double line; or only a single line yard, only one funnel gate is installed at the loading point, which can reduce the diverticulum at the loading point. Quantity of work;
    ( 5 ) The inclined shaft of the bucket should be equipped with corresponding diverticulum, such as loading equipment chamber, mine warehouse, signal chamber, shelter room, sprinkling mine clearing roadway and water pumping room .
Polypropylene is a kind of thermoplastic synthetic resin with excellent performance. It is a colorless and translucent thermoplastic lightweight general plastic. It has chemical resistance, heat resistance, electrical insulation, high strength mechanical properties and good high wear-resisting processing properties. It is widely used in the production of fiber products such as clothing, blankets, medical devices, automobiles, bicycles, parts, transportation pipes, chemical containers, etc., as well as food and drug packaging
Pp Resin,Polypropylene Resin,Polypropylene Resin Pellets,Polypropylene Resin Plastic
Jiangsu Zijun International Trade Co., Ltd. , https://www.zijunplastic.com