With the rise of e-commerce in commodity trading, the rise of broadband network projects in residential communities, and the rise of digital buildings in commercial buildings, people feel that human society has stepped into the era of network information. As an indispensable vehicle for the civilized world, the automobile must also be transformed from a free individual to a member of the information network. In the past two years, the production car dealers have drawn out the concept cars of the e era, such as the Ford “24-7†concept car, equipped with GPS, front and rear camera systems, audio-visual functions, and online transmission and reception. Drivers and passengers can use any device. Enjoy the atmosphere of network information at all times.
What is an Internet car? It is not only a means of transport, but also a place for office, communication and entertainment. It integrates existing hardware and software technologies, including satellite global positioning (GPS), wireless communications, network access, voice recognition, flat display, night vision technology, artificial neural networks and other technologies. The main new functions include remote diagnosis and vehicle control functions, mobile office functions, car website functions, and road navigation functions. Based on these functions, the network car's system configuration is actually composed of two parts. One part is the vehicle's own internal network system. It is controlled by an on-board network computer. It connects numerous sub-networks through a data bus to control the engine and other assemblies and planes. Each sub-network has different clock speeds and respective functions depending on the instrument panel display, central control door lock, and wireless telephone. The other part is the contact network system outside the vehicle, including GPS monitoring center, Internet and Intranet service providers, vehicle service centers, and units or home computers.
According to the concept of the above-mentioned network car, the main device of the network concept car is an electronic map navigation system. It uses a GPS receiver combined with a DVD-ROM machine to put a CD-ROM storing data of traffic roads in a country or a certain urban and rural area into a box. According to the instructions of the GPS control center, the network car can know its position and direction on the map and know the best route to the destination; there is a front and rear camera system, which will drive the blind corner through the center console flat panel display. It shows that at night, infrared light can be used to convert the heat generated by the stationary and moving objects in front of the vehicle into images, and can detect obstacles on the road at a distance when driving at night; there is a broadband wireless connection system to use this year. A GPRS system (transmission speed up to 100K) or a faster CDMA system (transmission speed up to 256K) that may be introduced at the end of the year will enable wireless connectivity in automotive broadband networks. Each owner and passenger can then set up their own network. Address, browse online at any time in the car or send and receive voice e-mail, hold remote office meeting Download vehicle maintenance information, and even can remotely control home appliances residence.
Some experts believe that with the development of information technology, the gradual integration of computer and communication technologies with automobiles will bring a new round of technological revolution to the automotive industry. Today, this technological revolution has begun to develop step by step.
Flatbed Laser Cutting Machine
UTECH flatbed Laser Cutting Machine works with high power Co2 laser tube, with function of cutting and engraving. Laser tube moves following the design of files, without power wasting, keeping machine work with same power on each position of working table. It gives better engraving and cutting result.
Large format could be used in many industry lines like acrylic cutting, fabric cutting, etc; it can also work well in aircraft engraving &designing, toy making, and many other non-metal materials.
>> Machine Features >>
1. CO2 Glass sealed laser tube
China famous brand (Reci, Yongli), good beam mode stability, service time over 1500~8000 working hours.
2. Laser Power
40W~180W, good quality and stable output to extend the laser tube service time.
3. Singapore imported lens and mirrors
High transmittance, good focusing, reflecting effect.
4. DSP control system, Leetro Controller
Ruida USB controller. USB interface, support online/offline working, English language system, adjustable cutting speed and power.
5. High accuracy stepper motors and drivers. Belt transmission
6. Aluminium blade table
7. Taiwan Linear guide rails
8. Lasercut 5.3 software, user`s manual
9. Tool box
>> Equipment coming together with machine >>
1. Industrial Cooling System
Constant water temperature ensures laser tube a longer service time and high stability
2. Exhaust Fan
Exhaust fan removes dust and smoke to protect the optical parts and the users.
3. Electromagnetic air pump
The air blowing protects the lens from smoke and dust pollution. Also it protects the material being processed from fire or burned.
>> Options >>
1. Red dot
The laser is invisible. Red dot shows the position of the laser on the material. It's more convenient for location.
2. Honeycomb or blade table optional
Aluminum blade table is for processing acrylic, wood and other hard materials;
Honeycomb table is for processing cloth, leather and other soft materials.
3. Up/down Z-axis
You can adjust the table height by operating the Z-axis to process thick materials. Z-axis is also a must when you need to use auto focusing and rotary.
4. Auto focusing
Auto focusing automatically adjust the focusing distance.
5. Rotary
Rotary is used when processing cylindrical objects like bottles, cups, sticks, etc.
>> The functional of optional spare parts>>
1. up and down platform: to process more thickness materials,above 5cm;
2. Rotary device:to engrave cylinder object
3. Auto focus: to check the focal length automatically
4. Red dot point: to see the sight of laser light
5.Chiller cw-3000/5000/5200: to cool the laser tube better, so that extend lifespan of it
6. Dual heads: to improve the working efficiency
<
Machine model:
UT-1325 laser cutting machine(Optional)
Laser type:
Sealed CO2 laser tube, wavelength: 10.64μm
Laser power:
80W / 100W / 150W / 180W
Cooling mode:
Circulating water cooling
Laser power control:
0-100% software control
Control system:
DSP offline control system
Max. engraving speed:
60000mm/min
Max cutting speed:
50000mm/min
Repetition accuracy:
0.01mm
Min. letter:
Chinese: 1.5mm; English: 1mm
Table size:
1300x2500mm
Working voltage:
110V/220V,50~60Hz
Working conditions:
temperature: 0-45°C, humidity: 5%-95%
Control software language:
English / Chinese
File formats:
*.plt,*.dst,*.dxf,*.bmp,*.dwg,*.ai,*las, *doc
Flatbed Laser Cutting Machine
Flatbed Laser Cutting Machine,Flatbed Co2 Laser Cutting Machine,Flatbed Laser Cutter,Metal Flatbed Laser Cutting Machine
Shandong U-May CNC Technology Co., Ltd. , https://www.fiberlasers.de