High Quality Windshield De-Icer for Car Care

WINDSHIELD DE-ICER
Features:
  This product is a kind of high resistance to freeze concentrated deicing agent, the melting ice effect is significant.It can effectively remove the frost , snow or ice on the surface of windshield or in the keyhole under 40ºCenvironment.Usage is simple and fast,just a spray, a poke and a wipe,can reach the effect.     
                                       
Directions:
1.Use this product at a ventilated place, shake well before using .
2. Spray to the ice at a distance of 30 to 40 cm to the windshield or lock hole,stubborn ice will melt away in a few minutes,in case of persistent ice, can use lid to scrape the ice ,then spray it.
3. Use the dry towel or flannelette to wipe clean the glass surface.
                                                      
Precaution:
When de-icing with lid, please be careful and do not hurt the glass surface and the surrounding.
Store it away from children.
In case of eye contact, rinse with water immediately and go to the hospital.
When spraying, keep the can upright, angel between the can and the level should be no less than 45 degrees.
It must be stored below 40ºC,shouldn't be placed in the car.
Keep far away from heat and open flame ,Isolating ,piercing and burning is strictly prohibited.
The gross weight and net weight will change over time and this is a common phenomenon for aerosol products. Wastage rate is no more than 2% yearly.

About Us
1. Technology and equipment
Brings in Britain KP system, Italian COSTER system, Switzerland PAMASOL system, and series of professional automatic aerosol created system. Tonyin group adhere to the philosophy of "Green environmental protection, High aspirations of success; Scientific and technical innovation, Unity is strength".
2. Certificate
It havs passed the identification of "ISO9001:2008 quality system", "ISO14001 environment system certificate", "Safe Production license of the dangerous chemicals" and "OHSAS18001 occupational,health and safety management system certificate". Auto Parts products have obtained CCC, DOT, ECE and GCC certifications etc. , and Car Care & Maintenance and Home Care products have passed SGS laboratory testing and achieved international qualieautifying and maintenance, car air treatment, fuel system conservation anty standards.
3. Products line
We have more than 120 kinds, 10 series of car detailing & cleaner products, for Glass, Tyres & Wheels, Paint, Cooling system, Engine, Air conditioner, Chassis, and Oil. for example: Headlight Restore, Windshield Washer Solvent, Wax, Spray Wax, Nano Chrome Paint, Nano Ceramic Coating, Tyre Sealent, Tyre & Wheel Cleaner, Leather Coating, Tyre Shine, Hand Soap, R134A, Wash & Wax (Shampoo), Carbon Cleaner, Lubricant, Gasoline Treatment, Injector Cleaner, Octance Booster, Brake & Parts Cleaner, Brake Fluid DOT-4, ATF Oil.....etc.
Due to the professional R & D team , the compnay continually keep launching new products and take the initiative in the markets.

Factory Overview:


Exhibition
  WINDSHIELD DE-ICER
Features:
  This product is a kind of high resistance to freeze concentrated deicing agent, the melting ice effect is significant.It can effectively remove the frost , snow or ice on the surface of windshield or in the keyhole under 40ºCenvironment.Usage is simple and fast,just a spray, a poke and a wipe,can reach the effect.     
                                       
Directions:
1.Use this product at a ventilated place, shake well before using .
2. Spray to the ice at a distance of 30 to 40 cm to the windshield or lock hole,stubborn ice will melt away in a few minutes,in case of persistent ice, can use lid to scrape the ice ,then spray it.
3. Use the dry towel or flannelette to wipe clean the glass surface.
                                                      
Precaution:
When de-icing with lid, please be careful and do not hurt the glass surface and the surrounding.
Store it away from children.
In case of eye contact, rinse with water immediately and go to the hospital.
When spraying, keep the can upright, angel between the can and the level should be no less than 45 degrees.
It must be stored below 40ºC,shouldn't be placed in the car.
Keep far away from heat and open flame ,Isolating ,piercing and burning is strictly prohibited.
The gross weight and net weight will change over time and this is a common phenomenon for aerosol products. Wastage rate is no more than 2% yearly.

About Us
1. Technology and equipment
Brings in Britain KP system, Italian COSTER system, Switzerland PAMASOL system, and series of professional automatic aerosol created system. Tonyin group adhere to the philosophy of "Green environmental protection, High aspirations of success; Scientific and technical innovation, Unity is strength".
2. Certificate
It havs passed the identification of "ISO9001:2008 quality system", "ISO14001 environment system certificate", "Safe Production license of the dangerous chemicals" and "OHSAS18001 occupational,health and safety management system certificate". Auto Parts products have obtained CCC, DOT, ECE and GCC certifications etc. , and Car Care & Maintenance and Home Care products have passed SGS laboratory testing and achieved international qualieautifying and maintenance, car air treatment, fuel system conservation anty standards.
3. Products line
We have more than 120 kinds, 10 series of car detailing & cleaner products, for Glass, Tyres & Wheels, Paint, Cooling system, Engine, Air conditioner, Chassis, and Oil. for example: Headlight Restore, Windshield Washer Solvent, Wax, Spray Wax, Nano Chrome Paint, Nano Ceramic Coating, Tyre Sealent, Tyre & Wheel Cleaner, Leather Coating, Tyre Shine, Hand Soap, R134A, Wash & Wax (Shampoo), Carbon Cleaner, Lubricant, Gasoline Treatment, Injector Cleaner, Octance Booster, Brake & Parts Cleaner, Brake Fluid DOT-4, ATF Oil.....etc.
Due to the professional R & D team , the compnay continually keep launching new products and take the initiative in the markets.

Factory Overview:


Exhibition
 

Special Shaped Parts

We are good at providing customization according to customer drawings to meet the special requirements of industrial production.

CUSTOM Tungsten Carbide Tooling

•Can Tooling •Wire Manufacturing •Compacting Dies and Punches •Tube Manufacturing •Compacting Core Rods •Cap and Closure •Powdered MetalTooling •Custom Tool SteelTooling •Textile Wear Parts •Oil and Natural GasWear Parts ·Ceramic CompactingDies •High Impact ExtrusionTooling •Slitting and ShearKnives •Automotive •Other

WEAR PARTS AND SPECIALTY COMPONENTS

•Tungsten Carbide Components •Tungsten Carbide Dies & Molds •Tungsten Carbide Rollers •Tungsten Carbide Bushing •Tungsten Carbide Punch & Pin •Tungsten steel ball valve •Ceramic parts •Tungsten Carbide Nozzles •Tungsten Carbide Bearings •Tungsten Carbide Machined Parts •Tungsten Carbide Seal Rings •Tungsten Carbide High Pressure PumpComponents

OIL AND NATURAL GAS WEAR PARTS

M.W.D. COMPONENTS

•Mud Deflectors •Valve Seats and Stems •Rotors and Stators •Erosion Sleeves •Flow Restrictor Bearings •Main Pulser Components •Orifices •Solid Carbide or Two-Piece Threaded Nozzles •Seal Rings •Ported Flow Cages •Thrust Bearings

DRILLING COMPONENTS

•Stratapax Cutters •Mud Nozzles •Solid Carbide ThreadedMud Nozzles •Cutting Bits •Mud Motor Bearings

CHOKE AND TRIM COMPONENTS

•Flow Control Components •Gates and Seats •Bushings

HIGH PRESSURE PUMP COMPONENTS

•Solid Carbide and Ceramic Plungers •Nozzles •Seats and Stems •Flow Tubes

Trimming Dies,Mig Drawing Dies,Special Shaped Parts,Steel Wire Drawing Dies

Dayue Seiko Technology (Dongguan) Co., Limited , https://www.dayuechn.com