1, can not take off the rod 2, the exclusion method: measure the voltage in the 220V ± 10V range;
3, not in place, too much jitter 4, the cause of the test: Check whether the switch is running properly and whether the balanced spring tension is too loose or too tight, troubleshooting: adjust the position of the control and tighten the tension spring bolt;
5. Abnormal ringing in the chassis (1) Detection reason: Check whether the bearings and active links are abnormal. Remedy: Lubricate or replace bearings.
For steel scraps, whether it's turnings, chips, filings, shavings, cuttings, sawdust, drillings, borings, debris, granules or sludge, Ecohydraulic steel recycling machine can help. If your scraps are small chips, you can choose our Steel Briquette Machine to press your chips to be small blocks. If your scraps are shavings or turnings, you can choose our Steel Baler to press your chips to be square bales, if your scraps are big like pipe tube sheet plate rebar, etc., you can choose our steel shear to cut your scraps to be smaller pieces.
Steel Shavings Recycling Machine, Steel Turnings Recycling Machine, Steel Scraps Recycling Machine, Steel Chips Recycling Machine, Waste Steel Recycling Machine
Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.jiangyinyejing.com