Gravity Taper Roller Conveyor Parts in Hlx Group

Posted on

  • Model NO.: HLX-CR-08
  • Surface Treatment: Zinc Plated, Rubber Coverd
  • Installation: Horizontal
  • Shaft Length: Customized
  • Sprocket: Single Row Teeth, Double Row Teeth
  • Materiall: Carbon Steel, Aluminum, SUS, PVC
  • Specification: Customizing
  • Material: Carbon Steel, Aluminum, PVC, Plastic
  • Motor Type: None
  • Size: Customized
  • Tube Length: Customized
  • Bearing: 609-Z-H, 6063h, 6004nh, 6201-Zn-H
  • Trademark: HLX
  • Origin: Guangdong

Gravity Taper Roller Conveyor Parts in HLX Group
1. Roller material: zinc, aluminum, stainless steel, pvc and other materials.
2.Roller ways: double sprocket tapered roller; O-groove rollers, simple tapered roller.
3. Roller lengths: generally it is from 500 mm to 1200mm which can be customized according to the customers' needs.
4. Line body bracket: stainless steel, aluminum, carbon steel with plastic and so on.
5. Transmission speed: usually 10 ~ 30M/min; To keep continuous operation according to the customers' needs. 
6. Non-standard power roller lines can be customized according to the specific requirements.

Model Roller diameter Length Bearing diameter Bearing Roller material Bearing material Superficial treatment
HLX-RC38 38 80-1000 12 6001ZZ or 6002ZZ carbon steel,  stainless steel,pvc,aluminum carbon steel or stainless steel galvanization, chrome-plate ,nickel-plate,rubber covered
HLX-RC50 50 80-1000 12
HLX-RC57 57 100-1000 12/15
HLX-RC60 60 100-1000 12/15
HLX-RC75 75 100-1000 12/15
 

Gravity Taper Roller Conveyor Parts in Hlx GroupGravity Taper Roller Conveyor Parts in Hlx Group


                                           
Gravity Taper Roller Conveyor Parts in Hlx Group
                              What'app: +86-13926497265

 

 

Silicone Rubber Mould

Silicone mould is a special mold for making crafts. According to performance, the raw materials of glue can be divided into ordinary silicone and weather silicone. The characteristics of silicone are high temperature resistance, corrosion resistance, strong tear resistance, high simulation precision, and it is used to make various handicrafts mold.

Mold should be made in time after the silicone is matched. Pour the glue on the highest part of the mold in a trickle, let it flow naturally, brush it in place with an oil paintbrush where the flow is not in place, if it is a piece of silicone, not only fill the entire product, but also brush the glue evenly. Each product should be brushed with at least three layers of silicone. The thickness of each layer of silicone is 1mm. In the process of brushing the silicone, each layer is required to be cured before the other layer can be brushed. When brushing the third layer, add one layer on top of the second layer. The thickness of the silica gel part of the whole mold is controlled in 3-4mm according to the different requirements of the size of the product, and the width is not greater than 60 mm of the product width. The time for the silicone to set is 20 minutes.

Silicone Mould

Silicone Injection Molding, Moulding Silicone, Rubber Molds, Rubber Mold Making

Sung Precision Mould & Plastic Co., Ltd. , https://www.injectionmoldingfactorys.com