Xiao Bian today to tell you about the electronic scales 5 display problems and solutions, with the use of electronic scales more and more people, there are many problems. The following Xiao Bian gave everyone a detailed explanation of this issue, hoping to help everyone.
1. The figure displayed on the display is not stable when weighing electronically.
Solution: First check whether the electronic scale is placed on the horizontal plane and whether the four scales are leveled, and re-adjust the position of the electronic scale and scale.
Second, when the electronic floor scale is turned on, the display shows numbers and there is no regular jump.
Solution: This situation is often due to the water vapor in the electronic junction box is too heavy or water. It should quickly disassemble the junction box to detect whether the water and dry with a hair dryer.
Third, the weight of electronic scales is usually light or heavy after normal power on.
Solution: At this time, it needs to be recalibrated according to the instruction manual. If the scale problem after the calibration is still not resolved, it can basically be confirmed as the cause of damage to the electronic scale sensor.
4. After the electronic scales are weighed, the display will not return to zero after the weighing object is removed.
Solution: The above situation should be that the signal is attenuated due to the line breakage. Look carefully at the electronic scale data line for damage. If so, replace it promptly.
5. After the power is turned on, the electronic scale display does not respond.
Solution: Carefully check that the power cable is in good condition and the monitor cable is in good condition. Replace it immediately if it is damaged. If the line connection is no problem, then you can only think of the monitor motherboard or hardware problems, this time only contact the manufacturer to return the factory maintenance.
This article by the Shanghai Heng Heng Electronic Technology Co., Ltd. to share, if you want to learn more about electronic scales, please contact us for information, thank you for your great support!
Aluminium Turning Parts
Suprel could make various kinds of metal machining Components and include aluminum turning parts.
We have a lot of making experiences on aluminum turning parts, nuts, bolts, aluminum bushes, aluminum shaft, aluminum pins, aluminum studs, aluminum tubes, aluminum connectors, aluminum valves parts, and ect.
With more than ten years' technology accumulation, we suprel have been always dedicated on aluminum profile Heatsinks, and also include various precision machining metal parts. Our smart design custom heatsink and custom machined parts are of good quality and reasonable prices.
Aluminium Turning Parts,Cnc Machining Aluminum Parts,Cnc Aluminum Parts,Custom Machined Aluminum Parts
Suprel Metalwork Co., Ltd , https://www.suprel-cool.com