When visiting the plant of the laser customer Manager Ji, S&A
found that Raycus fiber lasers were mainly used and supported by single
temperature chillers. For example, 500W Raycus fiber laser used CW-6100
chiller with a cooling capacity of 4,200W; 700-800W Raycus fiber laser
used CW-6200 chiller with a cooling capacity of 5,100W; and 1,500W
Raycus fiber laser was supported by CW-6300 chiller with a cooling
capacity of 8,500W.
In this regard, S&A recommended to Manager Ji that provision of dual
temperature and dual pump types for 1,500W or higher fiber lasers would
better protect the lasers. The 1,500W fiber laser, for example, is
recommended to be provided with CW-6250EN dual temperature & dual
pump chiller with a cooling capacity of 6,7500W.
PS: The water chillers of dual temperature and dual pump series are
specially designed for fiber lasers. Such chillers have two separate
temperature control systems that isolate the high temperature end and
the low temperature end. The lower temperature end cools the fiber body,
while the high temperature end cools QHB connection or lens.
Thank you so much for your support and trust in S&A. All S&A
water chillers have passed the certification of ISO, CE, RoHS and REACH,
and the warranty period has been extended to 2 years. Our products are
worthy of your trust!
S&A has a perfect laboratory test system to simulate the use
environment of water chillers, conduct high-temperature test and improve
quality continuously, aiming to make you use at ease; and S&A has a
complete material purchasing ecological system and adopts the mode of
mass production, with annual output of 60,000 units as a guarantee for
your confidence in us.
The technical parameter of CW-6200:http://Products/Dualcoolingcircuitch.html
CONTACT S&A
TE:+86-20-89301885
FAX:+86-20-84309967
SKYPE: teyuchiller
Email:
Website: http://
Stainless Steel Bevel Gears,Frame Gear,Sizing Machine Frame Gear,Bevel Gear For Seamless Pipe
Jiangsu Juli Gear Co., Ltd. , https://www.spiral-bevelgear.com