Distributed fixed cutter working principle
Flip the spreader to turn the mold 90 degrees in the air and then demould the mold to place the blank body together with the mold side plate on the cutting trolley. The cutting trolley starts its own walking through the motor and slowly cuts through the slitting device, then cuts the trolley and then walks to the horizontal After the central position of the cutting device is stopped, the cross-cutting device is activated, the cross-cutting frame is vertically descended from top to bottom, and the blank is horizontally cut and cut to a rising reset.
Steel Rocker Arms,Stamped Steel Rocker Arms,Stainless Steel Rocker Arms,Crower Stainless Steel Rocker Arms
MIANYANG TAPPET TECHNOLOGY CO., LTD , https://www.tappetracing.com