Cummins Inc. announced that it plans to invest US$24 million in the next three years to expand its technology center in North Charleston, South Carolina, to improve the technology center’s capabilities in R&D.
The technology center will be able to run various engines and test various fuels. Cummins plans to immediately recruit 31 mechanical engineers, technicians, and electronics engineers to recruit more employees in the near future.
Jim Trueblood, vice president of engine power engineering, said that the expansion of the South Carolina Technology Center will enable the technology center to conduct tests on diesel engines, pipelined natural gas, and non-standard gas engines, and to promote Cummins’ technological innovation in the automotive industry.
Installation and precautions of track connecting rod oil seal
The installation steps for the track link oil seal are as follows:
1. Cleaning: Clean the connecting parts to ensure that the surface is flat, clean, and free of grease and dirt.
2. Oil application: Apply a layer of lubricating oil to the connecting parts for better installation.
3. Installation: Gently push the oil seal into the connection area to ensure that the lip of the oil seal is not damaged.
4. Positioning: After positioning the oil seal, press it with your fingers to ensure it is in the correct position.
5. Inspection: Check if the oil seal is installed correctly and ensure that the lip is not damaged.
The precautions are as follows:
Before installation, check if the oil seal is damaged. If the oil seal is damaged, replace it with a new one.
Before installation, ensure that the surface of the connecting parts is flat, clean, and free of grease and dirt.
3. When installing the oil seal, gently push in to avoid damaging the lip of the oil seal.
4. After installation, check whether the oil seal is installed correctly to ensure that the lip is not damaged.
5. During use, the condition of the oil seal should be regularly checked. If any damage or wear is found, the oil seal should be replaced in a timely manner.
Wear ring for excavator,For excavator track,For excavator accessories
Safe Seal Technology Co., Ltd. , https://www.jolseals.com