CRC Wear Plate Chromium Carbide Overlay Hardfacing Cladded Plate

Chromium Carbide Overlay plate

Description
The refined microstructure within the Hyper wear plate overlay is based on a "micro-carbide" system, which combines the improved wear resistance and impact resistance of the martensitic and chromium carbide deposits into the one plate.

Hyster wear plate is bolted or welded into equipment high wear areas to enhance wear resistance. Hyster can also custom fabricate Hyster wear plate to suit your requirements.

Micro-Structure: Mixture of hgh volume hexgonal shaped chromium carbide in tough austenitic &Martensitic

Penetration to the base metal:1.5mm

Cold forming: Minimum Radius:150mm (for 6+4) Suggested:using hydrolic press to bend plate

Cutting: Plasma (From backing plate side)/ Laser Cutting/ Water Jet Knife

I) Hardness: HRC> =58(HB> =600)

II) Chemistry: 3.5 to 6.5% C
15 to 35% Cr
1.0 to 2.5% Mn
0.7 to 2.0% Si

III) Microstructure: Refined austenitic chromium carbide alloy containing 30-50% carbides.

*We can accept OEM&ODM orders. Other thickness, please contact us for more information.
Hyster White Iron Wear Block(700BHN-63HRC)-- Range of products based on a composite white iron wear surface metallurgically bonded to a weldable mild steel backing plate. Wear block is fixed to the surface of fixed and mobile plant equipment, such as mining buckets and chutes, where protection from severe abrasion is required.
Hyster Overlay Wear Plates--Chromium carbide clad wear plate manufactured in HYSTER and marketed worldwide. Overlay plate is well suited to fixed and mobile plant equipment associated with the construction, mining and resource industries; particularly iron ore, coal, cement and steel applications.
Hyster NiHard--Abrasion and high impact resistant product. It is often cast into billets and liners and used extensively in the mining, construction and mineral processes industries, particularly in bulk handling situations.
Hyster Tungsten Carbide-High standard abrasion resistant product. It is often used where the application has no impact force or very slightly impact.
 
Features and Benefits
Reduced Maintenance
• Protects any high wear area, eliminating the need for frequent rebuild or replacing wear plate
• Lasts longer than other wear protection
• Excellent alternative to hard facing which can lead to cracking of major structural components Increased Productivity
• Reduced maintenance ensures maximum machine availability
• Wide variety of shapes and sizes allows small areas to be protected, minimizing the affect on penetration and material flow
Lower Operating Cost
• Can be fit to flat or curved surfaces, eliminating the need to have wear plate formed to fit
• Bucket life is significantly increased, minimizing repair and new bucket orders
 
Typical Data Numbers:
  >white iron wear blocks life is 50% greater than that of Ni Hard Irons.
  >At least 7 times longer than A.R. type steels 360/400 BHN
  >5 times the wear rate of Manganese Steel
  >3 times the wear rate of Tapco Weld Hardfacing
  >4 times the wear rate of Astralloy-Vulcan
  >16 times the wear rate of Carbon Steel
  >3 times the wear rate of 500 BHN A.R. Plate
 
Hyster offer our clients a wide range of wear products and professional wear solutions. We also welcome custom made one off's and consumables.

Following are our laminated wear blocks:
Types---the most common ones are:
  1) Chocky bars (CB 25. CB40, CB50, CB65, CB80, CB90, CB100, CB130. CB150)
  2) Standard wear bars (DLP201A, DLP 125, DLP184, DLP528, DLP619, DLP451, DLP450, DLP2230, DLP2017, DLP4, DLP919, DLP1191, DLP515, DLP200, DLP271, DLP270, DLP508, DLP115, DLP337, DLP1101, DLP343 )
  3) Shaped wear bars
  4) Wear buttons& donuts(WB60, WB75, WB90, WB110, WB115, WB150, DLP1920, DLP1921, DLP1994, DLP2196)
  5) Shredder/Grinder hammer tips (DLP1654,90X90X50mm; DLP653,90X90X45mm; DLP1927, 90X90X55mm)
  6) Bi-metallic wear plates
  7) Knife edges(DLP1065-22, 203X22X50MM; DLP1265-22,305X22X50MM; DLP1065A-16, 203x16x50mm, DLP1065A-25, 203x25x62mm; DLP1265A-25, 305x25x56mm)
  8) Skid bars, skid blocks(DLP412, 250x150x45mm; DLP413, 200x150x45mm; DLP414, 250x250x45mm)
  9) Elbow wear blocks
  10) Other sizes and shapes
  11) Multi-function gradient cutter tooth
  12) Rockbox liners
  13) Micro-ledges Chromium Carbide Overlay plate

Description
The refined microstructure within the Hyper wear plate overlay is based on a "micro-carbide" system, which combines the improved wear resistance and impact resistance of the martensitic and chromium carbide deposits into the one plate.

Hyster wear plate is bolted or welded into equipment high wear areas to enhance wear resistance. Hyster can also custom fabricate Hyster wear plate to suit your requirements.

Micro-Structure: Mixture of hgh volume hexgonal shaped chromium carbide in tough austenitic &Martensitic

Penetration to the base metal:1.5mm

Cold forming: Minimum Radius:150mm (for 6+4) Suggested:using hydrolic press to bend plate

Cutting: Plasma (From backing plate side)/ Laser Cutting/ Water Jet Knife

I) Hardness: HRC> =58(HB> =600)

II) Chemistry: 3.5 to 6.5% C
15 to 35% Cr
1.0 to 2.5% Mn
0.7 to 2.0% Si

III) Microstructure: Refined austenitic chromium carbide alloy containing 30-50% carbides.

*We can accept OEM&ODM orders. Other thickness, please contact us for more information.
Hyster White Iron Wear Block(700BHN-63HRC)-- Range of products based on a composite white iron wear surface metallurgically bonded to a weldable mild steel backing plate. Wear block is fixed to the surface of fixed and mobile plant equipment, such as mining buckets and chutes, where protection from severe abrasion is required.
Hyster Overlay Wear Plates--Chromium carbide clad wear plate manufactured in HYSTER and marketed worldwide. Overlay plate is well suited to fixed and mobile plant equipment associated with the construction, mining and resource industries; particularly iron ore, coal, cement and steel applications.
Hyster NiHard--Abrasion and high impact resistant product. It is often cast into billets and liners and used extensively in the mining, construction and mineral processes industries, particularly in bulk handling situations.
Hyster Tungsten Carbide-High standard abrasion resistant product. It is often used where the application has no impact force or very slightly impact.
 
Features and Benefits
Reduced Maintenance
• Protects any high wear area, eliminating the need for frequent rebuild or replacing wear plate
• Lasts longer than other wear protection
• Excellent alternative to hard facing which can lead to cracking of major structural components Increased Productivity
• Reduced maintenance ensures maximum machine availability
• Wide variety of shapes and sizes allows small areas to be protected, minimizing the affect on penetration and material flow
Lower Operating Cost
• Can be fit to flat or curved surfaces, eliminating the need to have wear plate formed to fit
• Bucket life is significantly increased, minimizing repair and new bucket orders
 
Typical Data Numbers:
  >white iron wear blocks life is 50% greater than that of Ni Hard Irons.
  >At least 7 times longer than A.R. type steels 360/400 BHN
  >5 times the wear rate of Manganese Steel
  >3 times the wear rate of Tapco Weld Hardfacing
  >4 times the wear rate of Astralloy-Vulcan
  >16 times the wear rate of Carbon Steel
  >3 times the wear rate of 500 BHN A.R. Plate
 
Hyster offer our clients a wide range of wear products and professional wear solutions. We also welcome custom made one off's and consumables.

Following are our laminated wear blocks:
Types---the most common ones are:
  1) Chocky bars (CB 25. CB40, CB50, CB65, CB80, CB90, CB100, CB130. CB150)
  2) Standard wear bars (DLP201A, DLP 125, DLP184, DLP528, DLP619, DLP451, DLP450, DLP2230, DLP2017, DLP4, DLP919, DLP1191, DLP515, DLP200, DLP271, DLP270, DLP508, DLP115, DLP337, DLP1101, DLP343 )
  3) Shaped wear bars
  4) Wear buttons& donuts(WB60, WB75, WB90, WB110, WB115, WB150, DLP1920, DLP1921, DLP1994, DLP2196)
  5) Shredder/Grinder hammer tips (DLP1654,90X90X50mm; DLP653,90X90X45mm; DLP1927, 90X90X55mm)
  6) Bi-metallic wear plates
  7) Knife edges(DLP1065-22, 203X22X50MM; DLP1265-22,305X22X50MM; DLP1065A-16, 203x16x50mm, DLP1065A-25, 203x25x62mm; DLP1265A-25, 305x25x56mm)
  8) Skid bars, skid blocks(DLP412, 250x150x45mm; DLP413, 200x150x45mm; DLP414, 250x250x45mm)
  9) Elbow wear blocks
  10) Other sizes and shapes
  11) Multi-function gradient cutter tooth
  12) Rockbox liners
  13) Micro-ledges

Multi Head CNC Router

Jinan Upgoal Mechanical Equipment Co.,Ltd , https://www.upgoalcutter.com