1.More reasonable structure.
2.High E/R.H value.
3.Verg suitable for the large wharf.
4.Good energy absorption to reaction force ratio
5.Integrated and fully-embedded fender flanges make assembly & installation simple.
6.Large fender footprint with good force distribution could lead to relative light panel constuction.
7.Good shear force resistance due to the large diameter of the fender flangesuper cell rubber
Specification:
Â
| Specification | H (mm) |
ØW (mm) |
ØB (mm) |
D (mm) |
n x d (mm) |
| SC400H | 400 | 650 | 550 | 25 | 4*30 |
| SC500H | 500 | 650 | 550 | 25 | 4*32 |
| SC630H | 630 | 840 | 700 | 25 | 4*39 |
| SC800H | 800 | 1050 | 900 | 30 | 6*40 |
| SC1000H | 1000 | 1300 | 1100 | 35 | 6*47 |
| SC1150H | 1150 | 1500 | 1300 | 37 | 6*50 |
| SC1250H | 1250 | 1650 | 1450 | 40 | 6*53 |
| SC1450H | 1450 | 1850 | 1650 | 42 | 6*61 |
| SC1600H | 1600 | 2000 | 1800 | 45 | 8*61 |
| SC1700H | 1700 | 2100 | 1900 | 50 | 8*66 |
| SC2000H | 2000 | 2200 | 2000 | 50 | 8*74 |
| SC2250H | 2250 | 2550 | 2300 | 57 | 10*74 |
| SC2500H | 2500 | 2950 | 2700 | 70 | 10*74 |
| SC3000H | 3000 | 3350 | 3150 | 75 | 12*90 |
Applications:
1. Frontal berthing is fixed on frontal fender in an effort to alleviate stress acted upon sides of ship. According to specific demand, surface stress can drop to as low as 25t/m2. Thus, it is particularly suitable for berthing of large vessels.
2. Owing to high reaction force energy absorption per unit, it is can excellently meet the requirements of open sea wharf and dolphin type berth.
Â
The main indicators of this series of equipment basically reach the level of similar international products (such as Nielsen gold selectors, etc.). Compared with similar equipment at home and abroad, this series of equipment has the advantages of high cost performance, easy operation, and low maintenance costs.
The actual use of mining enterprises has proved that the recovery rate of placer gold is above 95%, especially when the single gold in vein gold mines is recovered, when the grinding particle size is less than 0.074mm accounting for 65%, the recovery rate of single gold can reach 98% Above, the recovery rate of 0.04mm monomer gold is over 97%. The discharge cycle is 1 to 4 hours, and the enrichment ratio can reach 1000 times.
Gold Centrifugal Concentrator,Centrifugal Concentrator,Centrifugal Gold Separator,Centrifugal Concentrator Gold Recovery
Changchun Gold Research Institute Co.LTD , https://www.ccgrizbs.com