1)Quick Detail:
1. Balanced pressure cutting nozzle
2. Applicable to acetylene
3. Material: Brass
2)Description:
1. It is available when oxygen supply pressure is below 0.6Mpa.
2. With cone angle of 30 degrees, it is suitable for international use.
3. With integrative structure; Made of high quality tellurium copper, finish machining, with a long using life.
4. Applicable to acetylene; Made with advanced techniques, high quality guaranteed.
5.100% flame test.
3)Applications:
GO2 acetylene cutting tip applicable to acetylene
4)Competitive Advantage:
1. Made of high quality tellurium copper, internal inlaid stainless steel tube
2. Long service life and the efficiency of cutting is high
Â
| Model No. | Diameter of cutting oxygen mm | Cutting thickness mm | Cutting speed mm/min | Gas Pressure Mpa | Gas consumption(m3/h) | ||
| Oxygen | Acetylene | Oxygen (m3/h) | Acetylene(L/h) | ||||
| 00 | 0.8 | 5~10 | 600~450 | 0.2~0.3 | >0.03 | 0.9~1.3 | 340 |
| 0 | 1 | 10~20 | 480~380 | 0.2~0.3 | >0.03 | 1.3~1.8 | 340 |
| 1 | 1.2 | 20~30 | 400~320 | 0.25~0.35 | >0.03 | 2.5~3 | 470 |
| 2 | 1.4 | 30~50 | 350~280 | 0.25~0.35 | >0.03 | 3~4 | 470 |
| 3 | 1.6 | 50~70 | 300~240 | 0.3~0.4 | >0.04 | 14.5~6 | 620 |
| 4 | 1.8 | 70~90 | 260~200 | 0.3~0.4 | >0.04 | 5.5~7 | 620 |
| 5 | 2.0 | 90~120 | 210~170 | 0.4~0.6 | >0.04 | 8.5~10.5 | 620 |
| 6 | 2.4 | 120~160 | 180~140 | 0.5~0.8 | >0.05 | 12~15 | 780 |
| 7 | 2.8 | 160~200 | 150~110 | 0.6~0.9 | >0.05 | 21~24.5 | 100 |
| 8 | 3.2 | 200~270 | 120~90 | 0.6~1.0 | >0.05 | 26.5~32 | 1000 |
| 9 | 3.6 | 270~350 | 90~60 | 0.7~1.1 | >0.05 | 40~46 | 1300 |
| 10 | 4.0 | 350~400 | 70~50 | 0.7~1.2 | >0.05 | 49~58 | 1600 |
| Note:Cutting conditions: | |||||||
| 1.Oxygen purity is above 99.5% | |||||||
| 2.Carbon rate of steel material≤0.45% | |||||||
| 3.Cutting way:vertical cutting | |||||||
| 4.Oxygen pressure refers to cutting pressure before arriving at the cutting torch. | |||||||
Thick Sheet Vacuum Forming Machine
Vacuum forming is a manufacturing process by which a sheet of plastic is heated and pressed over a form to create a part. This process is used to create many of the products in your home such as plastic containers, tubs, sink units, and electrical enclosures.
Thick sheet Vacuum Forming Machine is main for 2-10mm of material
if less 5mm ,then could with single heating to do.
More than 5mm ,by two later heating system to heating ,then increase blow function ,products will be more better
Plastic Vacuum Forming Machine,Thick Sheet Vacuum Forming Machine,Thick Sheet Thermoforming Machine,Thick Sheet Vacuum Plastic Forming Machine
Hangzhou Xiaoshan Wanfeng Mechanical & Electrical Equipment Factory , https://www.wanfengmachinery.com