Features:
1. Multiple functions combined in one, it can deal with many problems just with 1 machine, economical assistant tool for smart phone repair.
2. The application of advanced glue removing technology, this machine can remove glue effectively.
Â
3. 2 small pillars on the sides of operating plate, it can avoid the damage of steel wires when separating screen and it is helpful for operating safety.
Suitable for iPhone/Samsung phones repair.
4. The shell of vacuum LCD Separator is metal. And it's better than back light vacuum LCD Separator.
5. The vacuum LCD separator equip with four bearings. It's more convenient when separating.
6. The LCD separator equip with anti-slip mounting seats. It makes your work smoothly and decreases the opportunity of damaging LCD assembly.
7. This machine set can help separate the cell phone's touch screen from LCD, or from front glass lens.
8. Come with 5 phone moulds: upper mold for iPhone6, lower molds for iPhone4/5/6(4.7)/6(5.5).
Â
Specifications:
1. Dimensions: (12.99 x 13.78 x 16.73)" / (33 x 35 x 42.5)cm (L x W x H)
2. Material: Stainless Steel & Aluminum Alloy
3. Color: Golden & Black
4. Weight: 469.14oz / 13300g
5. Model: PSD968ZD+
6. Voltage: 110V
7. Frequency: 50/60Hz
8. Power: 800W
9. Plug Type:Â US Plug
10. Moulds Type: iPhone 6/6S Upper Mould, iPhone 4/4S Lower Mould, iPhone 5/5C/5S Lower Mould, iPhone6/6S Lower Mould, iPhone 6 Plus/6S Plus Lower Mould
11. Temperature Setting Rrovides Two Modes: Normal Setting and Set in a Timely Manne
Â
Screen Repair LCD Separator Remove Glue Frame Machine for iPhone G1L9
Middle frame separation steps:
1. Turn on the thermostat switch of heated plate, then set the temperature to 80°C.
2. Use a sealed bag, make the adhesive gap around and back of the assembly coated with whellote gas, then seal the bag. 3. Take out the assembly after 5min.
4. Heat it on the heated plate about 20s, turn on the corresponding mould switch, press the assembly on the suction mould. 5. After being sucked, separating the middle frame slowly by hand.
Screen separation steps:
1. Turn on the thermostat switch of heated plate, then set the temperature to 80°C.
2. Haul back the lower plate, lock the screw tightly(prevent sliding). Put the silicone pad on the heated plate holes to holes, then place the screen on it.
3. Turn on the suction switch, the screen will be sucked tightly. When the screen reaches an appropriate temperature, start to separate the screen with a steel wire.
Glue removing steps:
1. Loose the three screws of the blade groove, put in the blade and screw it.
2. Turn on the thermostat switch of glue remover on the right side, set the temperature to 180°C.
3. Put the silicone pad on the heated plate, when it reaches to required temperature, put into the screen with the flex cable inby.
4. Push into the screen, keep the height of the blade and the screen be the same, then move the screen to remove the glue.
Â
Frame press and laminating steps:
1. Turn on the thermostat switch on the right mould, set the temperature to 180°C.
2. Choose a lower mould, put the lower mould into the plate(the groove of the mould keep downward), push the lower mould to align with the upper mould, then fix the screws behind the lower mould.
3. After installing the frame of the screen, put it into the lower mould in the right direction. Put the lower mould on the plate in the right position, the upper mould press it for 6-10s, then take out the screen.
4. When laminating for iPhone6(4.7), it need to install the upper mould.
Â
Package Includes:
1 x 5 in1 Observing Seperator Bracket Machine
1 x US Standard Power Line
2 x Split-screen Bars
1 x Adsorption Silicone Pad
1 x Steel Wire
4 x Tools
5 x Moulds
Features:
1. Multiple functions combined in one, it can deal with many problems just with 1 machine, economical assistant tool for smart phone repair.
2. The application of advanced glue removing technology, this machine can remove glue effectively.
Â
3. 2 small pillars on the sides of operating plate, it can avoid the damage of steel wires when separating screen and it is helpful for operating safety.
Suitable for iPhone/Samsung phones repair.
4. The shell of vacuum LCD Separator is metal. And it's better than back light vacuum LCD Separator.
5. The vacuum LCD separator equip with four bearings. It's more convenient when separating.
6. The LCD separator equip with anti-slip mounting seats. It makes your work smoothly and decreases the opportunity of damaging LCD assembly.
7. This machine set can help separate the cell phone's touch screen from LCD, or from front glass lens.
8. Come with 5 phone moulds: upper mold for iPhone6, lower molds for iPhone4/5/6(4.7)/6(5.5).
Â
Specifications:
1. Dimensions: (12.99 x 13.78 x 16.73)" / (33 x 35 x 42.5)cm (L x W x H)
2. Material: Stainless Steel & Aluminum Alloy
3. Color: Golden & Black
4. Weight: 469.14oz / 13300g
5. Model: PSD968ZD+
6. Voltage: 110V
7. Frequency: 50/60Hz
8. Power: 800W
9. Plug Type:Â US Plug
10. Moulds Type: iPhone 6/6S Upper Mould, iPhone 4/4S Lower Mould, iPhone 5/5C/5S Lower Mould, iPhone6/6S Lower Mould, iPhone 6 Plus/6S Plus Lower Mould
11. Temperature Setting Rrovides Two Modes: Normal Setting and Set in a Timely Manne
Â
Screen Repair LCD Separator Remove Glue Frame Machine for iPhone G1L9
Middle frame separation steps:
1. Turn on the thermostat switch of heated plate, then set the temperature to 80°C.
2. Use a sealed bag, make the adhesive gap around and back of the assembly coated with whellote gas, then seal the bag. 3. Take out the assembly after 5min.
4. Heat it on the heated plate about 20s, turn on the corresponding mould switch, press the assembly on the suction mould. 5. After being sucked, separating the middle frame slowly by hand.
Screen separation steps:
1. Turn on the thermostat switch of heated plate, then set the temperature to 80°C.
2. Haul back the lower plate, lock the screw tightly(prevent sliding). Put the silicone pad on the heated plate holes to holes, then place the screen on it.
3. Turn on the suction switch, the screen will be sucked tightly. When the screen reaches an appropriate temperature, start to separate the screen with a steel wire.
Glue removing steps:
1. Loose the three screws of the blade groove, put in the blade and screw it.
2. Turn on the thermostat switch of glue remover on the right side, set the temperature to 180°C.
3. Put the silicone pad on the heated plate, when it reaches to required temperature, put into the screen with the flex cable inby.
4. Push into the screen, keep the height of the blade and the screen be the same, then move the screen to remove the glue.
Â
Frame press and laminating steps:
1. Turn on the thermostat switch on the right mould, set the temperature to 180°C.
2. Choose a lower mould, put the lower mould into the plate(the groove of the mould keep downward), push the lower mould to align with the upper mould, then fix the screws behind the lower mould.
3. After installing the frame of the screen, put it into the lower mould in the right direction. Put the lower mould on the plate in the right position, the upper mould press it for 6-10s, then take out the screen.
4. When laminating for iPhone6(4.7), it need to install the upper mould.
Â
Package Includes:
1 x 5 in1 Observing Seperator Bracket Machine
1 x US Standard Power Line
2 x Split-screen Bars
1 x Adsorption Silicone Pad
1 x Steel Wire
4 x Tools
5 x Moulds
Railway parts casting is one branch of carbon steel precision casting, which is widely used in railway markets. Precision Casting Of Railway Parts adopts lost wax casting, also called investment casting.
In wax pattern process,we mix stearic acid and paraffin wax. In wax pattern making, as you know, it is better than polyethylene, and the wax deformation is small. In dipping slurry process,most of the suppliers adopt water glass technics in domestic area,but we adopt compound technics or silica sol technics. As you know, carbon steel castings will be much smoother with compound technics (compound of water glass and silica sol technics),this method is so popular with our customers, and the quality is higher than water glass technics, the cost is lower than silica sol technics.
In shell making,we adopt automatic sand-covering production line, which was invented under the guidance of our general manager.The indoor temperature was controlled by air-conditions,keeping the temperature at 24℃±1℃, which can make the castings much more stable,the internal tissues much more well-proportioned.
Our railway parts as precision casting products have quality assurance in accordance with ISO9001: 2008, strict material inspection and exact dimension control, with 100% quality control. OEM order is welcome. The parts can be made completely based on your specifications such as drawing, design, sample etc.
Technical Parameter
| Surface Roughness: Ra 12.5 | Machining Tolerance:+/-0.01 mm |
| Certification: ISO 9001:2008 | Standard: ASTM. AISI. DIN. BS. JIS. NF |
| Heat Treatment: Quench and Temper by 2 sets box type furnaces | Inspection: Mt/Ut/Rt/100% Visual+100% Gage/CMM |
| Dimensions: OEM Customized/Customer's Drawing | Tolerance: as drawing |
| Trademark: JL | Package: Fumigation-free wooden case |
| Specification: Precision casting | Weight: 0.5-50(kgs) |
Precision Casting Of Railway Parts
Precision Casting Of Railway Parts,Investment Castings for Railway Parts,Railway Parts Precision Casts,Steel Cast for Railway Part
Wei fang junlong precision casting Co.,Ltd , https://www.junlongcasting.com