100nm Torque Electric Actuator

Model NO.: EA-0000194
Torque: 100nm
Protection Class: IP67
Type: on/off, Regulating
Control Signal: 4~20mA
Trademark: Grat
Transport Package: Carton/Wooden Box
Specification: CE, TUV, ISO
Origin: Wuhan, Hubei, China
HS Code: 8537109090
Model NO.: EA-0000194
Torque: 100nm
Protection Class: IP67
Type: on/off, Regulating
Control Signal: 4~20mA
Trademark: Grat
Transport Package: Carton/Wooden Box
Specification: CE, TUV, ISO
Origin: Wuhan, Hubei, China
HS Code: 8537109090
                      100NM Torque Electric Actuator        

Product Description
100nm Torque Electric Actuator
 

1.Technical parameters

Type Torque Action Time(S) Gyration Angle Motor Power(W) Rated Current(A) Weight(Kg)
100 100NM 4/7/15
30/60
0-90°
0-360°
AC220V DC24V AC380V AC220V DC24V AC380V 3.5
25 25 15 0.32 2.03 0.1
Power AC 220V±10% 50HZ/60HZ,  AC 380V±10% 50HZ/60HZ, DC24V
Insulation resistance  100MΩ/500VDC 
Anti-pressure level 1500VAC 1Min
Protection level IP67(It is no leakage in water about 20 meters deep)
Limited component Power-driven: Fully open and close, limit switch.
  Manual: Mechanical stopper
Protector   Overheat protector(self-recovery)
Installation position  Any direction from 0 to 360 degree
Electrical connection M20*1.5 Waterproof cable connection, power wire, signal wire
Ambient Temp   -30ºC--60ºC
 

2.Installation Diagram
100nm Torque Electric Actuator

3.Control Diagram
100nm Torque Electric Actuator

Model Circuit Model Circuit
S ON/OFF,no output signal CPT ON/OFF,output 4~20mA signal
MS ON/OFF,output passive contact signal PCU Regulation,output 4~20mA signal
PIU ON/OFF,output 0~1000Ω signal G ON/OFF,output passive contact signal
SP ON/OFF,middle position control H ON/OFF,output passive contact signa


Packing&Shipping
1.Packing: inner with bubble wrap,outer with cardboard box and wooden case.
2.Transportation:by sea,by air,by train.

Our Services
1.Professional consultation
2.24 hours response after sale.
3.One year warranty.
4.Safe packing for shipment.
5.Welcome sample order.


 

                      100NM Torque Electric Actuator        

Product Description
100nm Torque Electric Actuator
 

1.Technical parameters

Type Torque Action Time(S) Gyration Angle Motor Power(W) Rated Current(A) Weight(Kg)
100 100NM 4/7/15
30/60
0-90°
0-360°
AC220V DC24V AC380V AC220V DC24V AC380V 3.5
25 25 15 0.32 2.03 0.1
Power AC 220V±10% 50HZ/60HZ,  AC 380V±10% 50HZ/60HZ, DC24V
Insulation resistance  100MΩ/500VDC 
Anti-pressure level 1500VAC 1Min
Protection level IP67(It is no leakage in water about 20 meters deep)
Limited component Power-driven: Fully open and close, limit switch.
  Manual: Mechanical stopper
Protector   Overheat protector(self-recovery)
Installation position  Any direction from 0 to 360 degree
Electrical connection M20*1.5 Waterproof cable connection, power wire, signal wire
Ambient Temp   -30ºC--60ºC
 

2.Installation Diagram
100nm Torque Electric Actuator

3.Control Diagram
100nm Torque Electric Actuator

Model Circuit Model Circuit
S ON/OFF,no output signal CPT ON/OFF,output 4~20mA signal
MS ON/OFF,output passive contact signal PCU Regulation,output 4~20mA signal
PIU ON/OFF,output 0~1000Ω signal G ON/OFF,output passive contact signal
SP ON/OFF,middle position control H ON/OFF,output passive contact signa


Packing&Shipping
1.Packing: inner with bubble wrap,outer with cardboard box and wooden case.
2.Transportation:by sea,by air,by train.

Our Services
1.Professional consultation
2.24 hours response after sale.
3.One year warranty.
4.Safe packing for shipment.
5.Welcome sample order.


 

Treatment Pump

Treatment pump is a device used to dispense liquid , lotions, or other cream in a controlled and measured manner. It typically consists of a pump mechanism that is activated by pressing down on a button or lever, which then dispenses a specific amount of the product.

Treatment pumps are commonly used in skincare and cosmetic products, such as serums, moisturizers, and toners. They allow for precise and hygienic dispensing of the product, reducing waste and ensuring that the correct amount is applied to the skin.

Treatment pumps neck size:18mm,20mm,22mm,24mm,Material: plastic, spring, etc,Process: injection molding, electroplating, etc,Advantages: external spring, liquid pollution-free.

verall, treatment pumps provide a convenient and efficient way to dispense liquid treatments, ensuring that the correct amount is applied or administered each time.

Treatment Pump,Cream Pump,Cream Dispenser Pump,Lotion Pump

Jiangyin keyi packing Material Co.,Ltd , https://www.keyipacking.com